QuanSheng UVK5 User Manual page 2

0.进入应用
0. Enter App
1.主界面
1. Main Interface
CW解算码率
CW Decode Speed
收发频率
Tx / Rx Freq
当前信号强度
Current RSSI
信号强度曲线
RSSI Record Curve
2.基本操作
2. Basic Operation
2.1.各按键在主界面下的功能
2.1. Functions of each key on the main interface
B
1 Band
3 VFOMR
F #
快速菜单
Quick Menu
调整主要频率（
C
Adjust primary frequency (The frequency that
调整次要频率（另一个频率）
7 VOX
Adjust secondary frequency (The other frequency)
切换主/次要频率
2 A/B
Switch primary/secondary frequency
进入频率输入模式，手动输入主要频率值
5 NOAA
Enter frequency input mode, manually enter primary frequency
调整检测阈值
9 Call
Adjust detect threshold
切换接收带宽（25k/12.5k/6.25k)
6 HML
Toggle Rx BW (25k/12.5k/6.25k)
切换解调模式（FM/AM/DSB)
0 FM
Toggle Demod Type (FM/AM/DSB)
进入快速菜单
M A
Enter quick menu
返回上一级（若在频率输入模式或快速菜单中）或退出应用
EXIT D
Back to previous state (if in freq input mode or quick menu) or exit app
开始发送（FM模式）或激活发射链路（DSB模式且CW使能）
PTT
Start Tx (FM mode) or activate Tx chain (DSB mode with CW enabled)
5 NOAA
+
解调模式 接收带宽
Demod Type Rx BW
所指的那个频率）。步进：FM-1k；AM-0.5k；DSB-0.1k
points to).
电池电量
Battery
主要频率指示
Primary Freq Indicator
S表
S-Meter
检测阈值
Detect Threshold
CW解算结果
CW Decode Result
Step: FM-1k; AM-0.5k; DSB-0.1k
@Waixinyatian