LG LS090CE Owner's Manual page 16

Operating Instruction
Auto changeover operation(Optional)
ON
During Auto Changeover Operation
The air conditioner changes the operation mode automatically to keep indoor temperature. When room
temperature varies over ±2°C from the set temperature, air conditioner keeps the room temperature
within ±2°C of the set temperature by auto changeover mode.
16 Room Air Conditioner
1
Press the Start/Stop button.
The unit will respond with
a beep.
2 Open the door of the remote controller. To select Auto Changeover
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is shifted in the
direction of the arrow.
Cooling
Close the door of the remote controller. Set the temperature
3
lower than the room temperature. The temperature can be
set within a range of 18°C~30°C(64°F~86°F) at intervals of
1°C(2°F).
Set the fan speed again with the door
4
of the remote controller still closed.
You can select the fan speed in four
steps-low, medium, high and CHAOS.
Each time the button is pressed, the
fan speed mode is shifted.
Auto
Healthy
Changeover
Dehumidification
To raise the temperature
To lower the temperature
Heating
(Heat pump model only)