Fontana Showers TRIO FS10089 Installation Instructions Manual

Commercial polished chrome deck mount touchless electronic soap dispenser

Advertisement

©
Product code: FS10089
Fontana Sensor Faucets
FONTANA TRIO COMMERCIAL POLISHED CHROME
DECK MOUNT TOUCHLESS ELECTRONIC SOAP
DISPENSER INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
Before you begin, please read the installation instructions below. Observe
all local building and safety codes.
Unpack and inspect the items for any shipping damages. If you find
damages, do not install.
Please note all products must be installed by a professional and certified
plumber otherwise warranty might be voided.
POSSIBLE TOOLS REQUIRED*
Level
Plumbers Tape
Tape Measure
Adjustable Wrench
Hex Wrench
Thread Sealant
Pencil or Marker
Screwdriver
Drill
*not included
fontanasensorfaucets.com
Fontana Sensor Faucet
1
Customer Service: 800-684-4489

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TRIO FS10089 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fontana Showers TRIO FS10089

  • Page 1 © Product code: FS10089 Fontana Sensor Faucets FONTANA TRIO COMMERCIAL POLISHED CHROME DECK MOUNT TOUCHLESS ELECTRONIC SOAP DISPENSER INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN Before you begin, please read the installation instructions below. Observe all local building and safety codes. Unpack and inspect the items for any shipping damages. If you find damages, do not install.
  • Page 2: Specification

    © Fontana Sensor Faucets Size: (In inches) Specification Product Type: Commercial Main Construction Material: Brass Mount Type: Deck Sensor type: Active Infrared, Self-Adjusting Power Rating: 4 (D) Batteries / AC Adapter Optional Soap Pump: 6 Volt Noise-Free 9.0” Number of Tap Holes: Valve/Cartridge Type: Solenoid Valve 5.3”...
  • Page 3 © Fontana Sensor Faucets Installation Method Install the bracket Insert the pump Insert the locking on the wall onto the bracket plate into bracket Soap Refill Process Affix the bottle with Unscrew the Add soap into full soap onto the pump, empty bottle.
  • Page 4: Battery Box

    © Fontana Sensor Faucets Deck Mounted Faucet Battery Box Battery case Battery case cover - + Screws + - Batteries fontanasensorfaucets.com Fontana Sensor Faucet Customer Service: 800-684-4489...
  • Page 5 © Fontana Sensor Faucets 1. Remove cover of battery case. 2. Install four (4) D size alkaline batteries. Anode Cathode Note: Make sure the batteries are installed in correct orientation (polarity). 3. Replace battery case cover. 4. Tighten screws. The standard life cycle time is 2 years, based on average use 2000 times/month. Usage Place hands immediately Predetermined amount...
  • Page 6: Commissioning Sequence

    © Fontana Sensor Faucets Commissioning Sequence Care & Cleaning Before using the soap dispenser for the first time the • Wipe away any debris adhering to the spout or following sequence must be carried out. sensor. Fill the bottle full of soap. Locate the dispense button on the side of the pump.

Table of Contents