Download Print this page

Fontana Showers FS1193 Installation Instructions Manual

Fontana bavaria stainless commercial automatic soap dispenser

Advertisement

Quick Links

FONTANA BAVARIA STAINLESS COMMERCIAL
AUTOMATIC SOAP DISPENSER INSTALLATION
BEFORE YOU BEGIN
Before you begin, please read the installation instructions below. Observe
all local building and safety codes.
Unpack and inspect the items for any shipping damages. If you find
damages, do not install.
Please note all products must be installed by a professional and certified
plumber otherwise warranty might be voided.
POSSIBLE TOOLS REQUIRED*
Plumbers Tape
Thread Sealant
FontanaShowers
FontanaShowers
FontanaShowers
FontanaShowers
INSTRUCTIONS
Tape Measure
Drill
Level
Adjustable Wrench
Pencil or Marker
1
©
©
Product code: FS1193
Hex Wrench
Screwdriver
fontanashowers.com
Customer Service: 800-684-4489
*not included

Advertisement

loading
Need help?

Need help?

Do you have a question about the FS1193 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fontana Showers FS1193

  • Page 1 FontanaShowers FontanaShowers © © Product code: FS1193 FONTANA BAVARIA STAINLESS COMMERCIAL AUTOMATIC SOAP DISPENSER INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN Before you begin, please read the installation instructions below. Observe all local building and safety codes. Unpack and inspect the items for any shipping damages. If you find damages, do not install.
  • Page 2: Rubber Washer

    FontanaShowers FontanaShowers © © Size 3.6” Product Type: Commercial Main Construction Material: Brass Mount Type: Deck Handle Type: Infra-Red Power Rating: 3 Amp Fuse, AC: 230V DC: 1.5V 4.1” Batteries Required: 4 AA Batteries (not supplied) 2.3” Number of Tap Holes: Valve/Cartridge Type: Solenoid Valve Plumbing System Requirements:...
  • Page 3 FontanaShowers FontanaShowers © © Installation Method Install the bracket Insert the pump Insert the locking on the wall onto the bracket plate into bracket Unscrew the Add soap into full soap onto the pump, empty bottle. the empty bottle. and do not over tighten. fontanashowers.com FontanaShowers FontanaShowers...
  • Page 4 FontanaShowers FontanaShowers © © Battery case Battery case cover - + Screws + - Batteries fontanashowers.com FontanaShowers FontanaShowers Customer Service: 800-684-4489...
  • Page 5 FontanaShowers FontanaShowers © © 1. Remove cover of battery case. 2. Install four (4) D size alkaline batteries. Anode Cathode Note: Make sure the batteries are installed in correct orientation (polarity). 3. Replace battery case cover. 4. Tighten screws. The standard life cycle time is 2 years, based on average use 2000 times/month. Usage Place hands immediately Predetermined amount...
  • Page 6 FontanaShowers FontanaShowers © © Commissioning Sequence Care & Cleaning Before using the soap dispenser for the first time the • Wipe away any debris adhering to the spout or following sequence must be carried out. sensor. Fill the bottle full of soap. Locate the dispense button on the side of the pump.