Related Manuals for Beko BDV7200X2
Summary of Contents for Beko BDV7200X2
- Page 1 Front-Loading Dryer Owner’s Guide: Installation and Operation Instructions BDV7200X2 2960313944_EN/180124.0826...
- Page 2 Please read this user manual first! Dear Customer, Thank you for prefering a Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 Your Dryer 6 Technical Specifications 2 Important Safety Instructions 7 User maintenance and cleaning instructions 3 Installation Instructions 7.1 Lint filter ..........22 3.1 Electrical connection ......9 7.2 Sensor ..........22 3.2 Grounding Instructions .......10 8 Troubleshooting 3.3 Appropriate installation location ..11 3.4 Minimum Installation Clearances ..11 9 Warranty Statement 3.5 Use on top of a washer ......11... -
Page 4: Your Dryer
Overview Figure 1 Control Panel Type label Loading Door Adjustable Feet Lint Filter NOTE: Specifications of this appliance may change without notice to improve the quality of the product. Drawings in this manual are schematic and may not match your product exactly. Values stated on the dryer labels or in the documentation accompanying it are obtained in the laboratory in accordance with relevant standards. -
Page 5: Important Safety Instructions
Important Safety Instructions WARNING: To reduce the risk of fire or electric shock resulting in serious injury or death when using this appliance, follow the basic precautions including the following: Read all instructions before using the appliance. Failure to follow these instructions will increase the risk of fire or electric shock and will void the warranty. - Page 6 This appliance is equipped with a cord having an equipment- grounding conductor and a grounded plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock.
-
Page 7: Do Not Use Fabric Softeners Or Products To Eliminate Static Unless Recommended By The Manufacturer Of The Fabric Softener Or Product
Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber-backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product. - Page 8 Do not allow children to play on or in the appliance.Close supervision of children is necessary when the appliance is used near children. Keep pets away from the appliance during the drying cycle. Before the appliance is removed from service or discarded, remove the door to the drying compartment.
-
Page 9: Installation Instructions
Installation Instructions WARNING: Failure to follow these instructions could result in a risk of fire •The clothes dryer (“appliance‘) installation must be performed by a qualified installer. Power Cable •Install the appliance according to the manufacturer’s instructions and local codes. •Do not install a clothes dryer with flexible plastic venting materials. -
Page 10: Grounding Instructions
If the dryer is installed in a mobile home, recreational vehicles, new branch-circuit installations or in areas where local codes do not permit grounding through the neutral conductor, only a 4-wire Power Cable power supply cord shall be used. To change the cord: 1. -
Page 11: Appropriate Installation Location
Ventilation Requirements A damaged power cable must be Closet door must have 2 openings, one replaced by a qualified electrician. located 3.2 inches (8 cm) from bottom of door having a minimum area of 16 sq. inches (103 WARNING – Improper connection cm2) and the other one located 3 inches (7.5 of the equipment-grounding cm) from top of door having a minimum area... - Page 12 ” 36.14 (918 mm) min. 33 ¾" (856,5 mm) To connect a ventilation duct; Metal rigid duct 1.Connect the air outlet metal duct to the Number of spacer by turning it counter-clockwise. Length Elbows 2.Make the duct passages as shown in the illustration below.
- Page 13 Air outlet duct must be extended directly outdoors. There must be a limited number of elbows to not hinder air flow. To prevent water accumulation in the duct, make sure it is not folded on the floor. In Canada only those foil-type flexible ducts, if any, specificially identified for use with the appliance by the manufacturer shallbe used.
-
Page 14: Destroying Packaging Material
Care must be taken not to pinch or bend the ducts. The end of the hose should not be bent, it should not be stepped on and it must not be folded between the drain and the dryer. The total length of flexible metal duct shall not exceed 7.8 foot (2.4 m). -
Page 15: Operating Instructions
Operating Instructions WARNING: To reduce the risk of fire, electric shock, or personal injury, read the 2. IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. LAUNDRY DRYING SYMBOLS Drying Suitable for No Iron Do not dry- Sensitive / Do not dry Do not dry Symbols dryer... -
Page 16: Preparing Clothes To Be Dried
The following weights are given as examples. 4.4 Preparing clothes to be dried Home articles Weight (g)* Weight (lb)* •All laundry must be spun at the highest possible spin speed the washer allows for the Cotton quit covers (double) 1500 3 ¼... -
Page 17: Operating The Product
Operating the product 5.1 Control Panel End / AntiWrinkle Super Regular Dry Extra Damp Dry Normal Filter Drying Damp Lock Ready Timed Buzzer Dry/Time Ending Buzzer Start / Pause Level On/Off/Program selection button Buzzer volume button Start/Pause button Drying level/Time programs selection button End Time button 5.2 Symbols... -
Page 18: Program Selection And Consumption Chart
5.4 Program selection and consumption chart Spin speed in washing Drying time Programs Wight (Ib) Explanation machine (rpm) (minutes) Durable clothing can be dried with this Cottons/Normal Medium program at a normal temperature. Less durable clothing can be dried with this program at a at a lower temperature Perm Press compared to the cottons program. -
Page 19: Auxiliary Functions
Drying level Changing the end time If you want to change the duration during the countdown: Use for heavy-duty fabrics in to be Super very dry Cancel the program by turning the On/Off/ Program selection knob. Select the program Extra Use for extra drying you want and repeat the End Time selection process. -
Page 20: Changing The Program After It Is Started
When the child lock is activated, Adding laundry after the drying the child lock warning indicator on operation starts may cause the the screen turns on. dried laundry inside the machine Child lock deactivates when the to mix with wet laundry and leave drying machine is turned off and on the laundry damp at the end of by the On/Off/Cancel knob. -
Page 21: Technical Specifications
Technical Specifications Model Vented Dryer with electronic sensor control Height (in) 33 1/4 Witdth (in) 23 7/16 Depth (in) 22 15/16 Height adjustment of feet (in) 1 1/16 Net weight (plastic front door usage) (lbs) 69,7 Net weight (glass front door usage) (lbs) 73,4 Voltage / Frequency 208-240V ~ 60 Hz... -
Page 22: User Maintenance And Cleaning Instructions
User maintenance and cleaning instructions 7.1 Lint filter 7.2 Sensor Lint and fibers released from the laundry in to There are humidity sensors in your dryer that the air during the drying cycle are collected in detect whether the laundry is dry or not. the “Lint Filter”. -
Page 23: Troubleshooting
Troubleshooting Problem Cause Explanation / Solution * Clean the lint filter. *Lint filter may not have been * Meshes of the filter may be cleaned. clogged. Wash with water. *Remove the objects (if any) that *Ventilation grids on the front side of block ventilation in front of the the machine are blocked. -
Page 24: Warranty Statement
Warranty Statement This product is fully tested and went through official quality assurance inspections before leaving the original manufacturing site. Warranty terms for this Blomberg household appliance is not valid if the product is altered, tampered, modifed, additional parts assembled, fixed and re-packed by an authorized distributor, servicer, a third party retailer, reseller or by any other unauthorized person(s) Dryer / User Manual...
Need help?
Do you have a question about the BDV7200X2 and is the answer not in the manual?
Questions and answers