Page 2
Out of the Box Case Headset Earplugs USB-C...
Page 3
Case Antenna Flip the case antenna up before powering it on.
Page 4
Case Power Button Hold the case’s power button down for 3 seconds until you see its green light flash.
Page 5
Headset Power off / Volume down Power on / Volume up With the headset near the case, hold the + button for 3 seconds until you see its green light start flashing.
Bluetooth Pairing Find “Zygo” in your phone’s list of Bluetooth devices. Use our app to rename your Zygo in the “Profile” section.
Page 7
Case Position Leave the case poolside. It is splash-proof but cannot be submerged. Your phone can be up to 30 feet away from the case.
Page 8
Charging Charge using the USB-C cable provided. A solid orange light on both units indicates they’re charging. Headset battery: 2 hours Case battery: 7 headset charges These are approximate figures and depend on several factors. For example, louder volume drains the headset battery faster.
Page 10
Headset Fit The headset uses bone conduction. The pads rest in front of your ears, not in them. We recommend putting the headset on before goggles.
Page 11
Headset + Swim Cap You can wear the headset over or under your cap.
Page 12
Earplugs Earplugs can improve audio performance by reducing the impact of ambient noise.
Checking Battery Levels Download the Zygo app to check the real time battery levels of your case and headset.
Page 14
Counting Laps Hold the headset’s + button for 1 second to start lap counting. Release it and you’ll hear a tone that confirms it has begun. Hold the same + button for 1 second to end lap counting. Bring the headset within 15 yards of the case to transfer lap counting data to your app.
Need help?
Do you have a question about the Z2 and is the answer not in the manual?
Questions and answers