Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Mustang Survival QUADRA MSD100
Summary of Contents for Mustang Survival QUADRA MSD100
- Page 1 FOR MODEL NUMBERS MSD100 & MSD150 QUADRA Dry Suit Owners Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS About Mustang Survival Dry Suits Instructions for Use Fitting Dry Suit Neck and Wrist Seals Donning and Doffing the Suit Cleaning Maintenance Accessories Warranty Information Contact MUSTANG SURVIVAL / QUADRA DRY SUIT... -
Page 3: About Mustang Survival Dry Suits
Our dry suits feature trimmable latex neck and wrist seals, or a patented Closed Comfort System (CCS) neck seal and trimmable neoprene wrist seals. Every Mustang Survival dry suit is leak tested to ensure waterproof integrity and the highest level of reliability & performance prior to leaving the factory. -
Page 4: Instructions For Use
FITTING DRY SUIT NECK AND WRIST SEALS This manual supplies instructions on the various neck and wrist seals offered by Mustang Survival, and how to ensure proper fit. There are step-by-step instructions on how to adjust the CCS adjustable neck seal, as well as instructions on how to trim your latex or neoprene neck and/or wrist seals for a proper fit. - Page 5 If neck seal trimming is necessary, turn the neck seal inside out so you can see the rings running parallel down the gasket around the circumference of the neck seal. 2 Trimming only one ring at a time, carefully cut between the rings with a very sharp pair of scissors.
-
Page 6: Donning And Doffing The Suit
CUFF AND NOT THE SEAL. PULLING ON THE SEAL CAN LEAD TO DAMAGE. 6 Roll the hook-and-loop on the wrist covers back and refasten to a snug fit. 7 Repeat steps 5 through 7 for the left arm. MUSTANG SURVIVAL / QUADRA DRY SUIT... - Page 7 8 Bring the upper portion of the suit over your head, aligning the neck opening with the top of the head. Reach inside the top of the neck seal with your fingers and gently pull the seal outward and down as you push your head through. Flatten any folds or rolls of the seal against the skin.
- Page 8 Once your hands are out of the seals, invert the seals back out of the suit sleeve so they are oriented away from the suit. PULLING ON THE WRIST SEAL MAY DAMAGE THE SEAL. MUSTANG SURVIVAL / QUADRA DRY SUIT...
-
Page 9: Cleaning And Maintenance
CLEANING AND MAINTENANCE CLEANING Thoroughly rinse your dry suit after every use. 2 Treat stains with a pre-wash treatment, such as Shout® or Spray ‘n Wash®, following the manufacturer’s instructions. Rinse well. 3 Using a front-load washing machine only, wash warm (104° F/40° C) on delicate cycle using a gentle liquid detergent. -
Page 10: Maintenance
Flip over the zipper end and lubricate the back in the same highlighted areas as the front. e) Close the zipper. Repeat before long term storage. DO NOT LUBRICATE THE ZIPPER TEETH. W-SEAL LUBRICATIONS FIGURE 1 LUBRICANT FIGURE 2 LOCATIONS MUSTANG SURVIVAL / QUADRA DRY SUIT... -
Page 11: Accessories
ACCESSORIES The following accessories are available for Mustang Survival dry suits: • Thermal base layers (Part #MSL500-MSL550) • Zipper lubricant (Part #MA2292) For more information on these items please visit: www.mustangsurvival.com... -
Page 12: Warranty Information
Proof of purchase may be required at the discretion of Mustang Survival. Products which, in the sole judgment of Mustang Survival, have received excessive or abusive use or have been altered in any way by a dealer, the Customer, or any other person, will not be covered by this limited warranty. -
Page 13: Contact
CONTACT For further information concerning this manual or the suit, contact Mustang Survival: Telephone: 1 800 526 0532 Email: custserv@mustangsurvival.com... - Page 14 MUSTANG ENGINEERED For 50 years Mustang Survival has been engineering high-performance marine gear for military, coast guard, and rescue personnel. With a focus on applied research and field-testing, we’re committed to the protection and enhancement of those who push themselves to extremes. We build gear that saves lives and fuels exploration.
Need help?
Do you have a question about the QUADRA MSD100 and is the answer not in the manual?
Questions and answers