Page 1
A/C MANIFOLD GAUGE SET Stock Number W89739 OWNER'S MANUAL WARNING: USE ONLY R-1234YF REFRIGERANT WITH THE A/C MANIFOLD GAUGE SET WARNING TO PREVENT EXPLOSION, SERIOUS IN- JURY, AND DEATH: • Service of air conditioning systems must be done only by trained and experienced techni- cian to avoid overfilling.
PRODUCT SPECIFICATIONS while taking drugs. If there is any doubt, do not operate the Blue (Low) Gauge 0-120psi gauge. Blue Hose ¼ in. FFL x 50 in. 12. Maintenance. For your safety, service and maintenance Red (High) Gauge 0-500psi should be performed regularly by a qualified technician. Red Hose ¼...
APPLICATIONS 1. The Red HP Gauge (2) is used to measure high pressure compressor discharge side pressure. 2. The Blue LP Gauge (1) is used to measure low-pressure side suction or pressure. 3. The Manifold Valves (3, 4) control the flow of refrigerant to and from the Yellow Hose (14), also called the Charge Hose. 4.
OPERATION Read the ENTIRE SAFETY WARNINGS Note: Throughout this manual: section at the beginning of this manual HP means High-pressure before set up or use of this product. LP means Low-pressure CWmeans Clockwise WARNING CCW means Counterclockwise TO PREVENT EXPLOSION, SERIOUS Note: Procedures such as charging INJURY, AND DEATH:Service of air con- refrigerant through the HP side of...
WARNING 3. Use in well-ventilated area only. 4. Keep gauge and hoses away from moving To prevent SERIOUS INJURY and DEATH: engine parts. 1. Wear ANSI-approved safety goggles and 5. Turn off vehicle’s engine and A/C system heavy-duty work gloves during setup and use. before attaching gauge.
Page 6
WARNING 3. Use in well-ventilated area only. 4. Keep gauge and hoses away from moving To prevent SERIOUS INJURY and DEATH: engine parts. 1. Wear ANSI-approved safety goggles and 5. Turn off vehicle’s engine and A/C system heavy-duty work gloves during setup and use. before attaching gauge.
Page 7
WARNING 3. Use in well-ventilated area only. 4. Keep gauge and hoses away from moving To prevent SERIOUS INJURY and DEATH: engine parts. 1. Wear ANSI-approved safety goggles and 5. Turn off vehicle’s engine and A/C system be- heavy-duty work gloves during setup and use. fore attaching gauge.
INSPECTION, MAINTENANCE AND CLEANING WARNING condition that may affect safe operation. If a problem with the set occurs, have it corrected before further use. Do not use damaged equipment. TO PREVENT SERIOUS INJURY FROM TOOL FAIL- URE: Do not use damaged equipment. If abnormal Periodically, clean with a damp cloth using a mild noise, vibration, or leaking air occurs, have the prob- detergent or solvent.
Need help?
Do you have a question about the W89739 and is the answer not in the manual?
Questions and answers