Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kaptia EVO II
Summary of Contents for Kaptia EVO II
- Page 1 EVO II Quick user guide 09/2024 Page 1...
- Page 2 Introduction The EVO II remote control allows the copying and/or programming of HCS controls (rolling code) with a frequency of 433.920 MHz and OOK modulation. Each button on the remote transmits a different channel (see image). The remote also has a hidden button on the back.
- Page 3 Operation To program the remote control, it must be connected to the micro USB cable of the Kaptia Klever duplicator. The app will guide you through all the necessary steps until programming is complete. Indicator light The device LED reports the following situations:...
- Page 4 Battery replacement This remote control works with 2 NON-RECHARGEABLE CR2016 type batteries. To replace them, you must lever the notch on the right side with a coin or similar object until it opens. Once opened, the used batteries must be removed from the battery holder and replaced with new ones of the same type, respecting the polarity.
- Page 5 Range < 100 meters Status LED color Blue Battery 2 x 3V (type CR2016) Compatible system Kaptia Klever and other duplicators Updatable: No Important: The programming connector should only be used to program the device. Using this connector for any other purpose may damage the device.
Need help?
Do you have a question about the EVO II and is the answer not in the manual?
Questions and answers