Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Kaptia Unik 3B
- Page 1 Unik 3B Quick user guide 09/2024 Page 1...
- Page 2 Introduction The new Unik 3B model allows the copying and/or programming of most of the fixed and evolving code controls in our catalogue. This remote control has been designed to be able to simultaneously program different types of codes (fixed and evolving), each with its own frequency. Thanks to periodic updates, new compatibilities are introduced remotely in these devices, which avoids returns and allows stock to be reduced.
- Page 3 Operation To program the remote control, it must be connected to the micro USB cable of the Kaptia Klever duplicator. The app will guide you through all the necessary steps until programming is complete. Advanced Features This remote allows button combinations, which can be used to increase the number of codes on the same device.
- Page 4 Battery replacement This remote control works with 1 NON-RECHARGEABLE battery type CR2032. To replace them, you must lever the notch on the right side with a coin or similar object until it opens. Once opened, the used batteries must be removed from the battery holder and replaced with new ones of the same type, respecting the polarity.
- Page 5 Range < 100 meters Status LED color Orange / Red Battery 1 x 3V (type CR2032) Supported system Kaptia Klever / Key Updatable Yes Important: The programming connector should only be used to program the device. Using this connector for any other purpose may damage the device.
Need help?
Do you have a question about the Unik 3B and is the answer not in the manual?
Questions and answers