Qufora IrriSedo Flow Quick Manual

Quick guide
1
2
3
4
5
Qufora® is a registered trademark of Qufora A/S. ©01/2023. All rights reserved Qufora A/S, 3450 Allerød, Denmark.
Make sure the water flow regulator is closed.
Fill the water bag with luke warm tap water (36-38° C).
You will need more water than you need for your irrigation
to prepare your system, approximately 100-300 ml water.
Once the water bag is filled, press down on the flip lid until
it is closed.
Place the water bag anywhere between floor and shoulder
height. It can be placed on the floor or hanging by the
handle.
Open the cone pouch at the perforated line. Whilst the
cone is still in the pouch press the cone firmly onto the
tube connector to assemble your system. Attach the
empty pouch to a surface using the sticky area on the
back of the pouch.
To prepare the system when hanging, hold the pump so
the water flow regulator is at the top. Now open the water
flow regulator.
To prepare the system when placed on the floor, follow
as above and squeeze the pump. When you see the water
coming out of the cone, close the water flow regulator.