Page 2
Command Center is a cross pla�orm device. Via ethernet, it can connect to a single or mul�ple MFD network, connect to a Lumishore mul�ple MFD network, connect to a Lumishore Lumi-link display or be controlled by a smart display or be controlled by a smart Phone/tablet (via Wi-Fi).
Page 4
Display or MFD. Each MFD manufacturer offers different lengths of network cable, check your installa�on length before ordering. Lumishore supplies a Field install RJ45 IP67 cover to make your connec�ons to the Command Center waterproof. The cover should be used on all installa�ons. Note: The internal support may or may not be required depending on the type of Ethernet connector molding.
Page 7
Command Center Connec�ons The Command Center uses a proprietary form of DMX to communicate between the lights and controller. Whilst Lumishore EOS lights can be controlled by any DMX controller (with limited feature set), the Command Center can only be used to control Lumishore products.
Need help?
Do you have a question about the EOS-LUX Command Center and is the answer not in the manual?
Questions and answers