JVC GZ-MG57US Instructions Manual page 62

Troubleshooting (Continued)
62
EN
Trouble
Recording (Continued)
The LCD monitor
indications blink.
Digital zoom does not
work.
The recorded image is
white.
The focus is not
adjusted automatically.
The color of the image
looks strange.
The recorded image is
too dark.
The recorded image is
too bright.
White balance setting
cannot be activated.
The continuous
shooting speed of still
images is slow.
Playback
Playback cannot be
performed.
The same image is
displayed for a long
time during video
playback, or motion is
choppy.
The black & white fader
does not work.
There is a noise during
playback.
Certain modes of program AE, effect, DIS, and other functions
that cannot be used together are selected at the same time.
Set [ZOOM] to [60X] or [700X].
Digital zoom is not available in the still image recording mode.
In bright places, setting "Nightalive" or a slow speed is not
recommended.
Set focus to the automatic mode.
Clean the lens and check the focus again.
Try manual white balance adjustment.
Try backlight compensation or manual exposure.
Try manual exposure.
Do not select the sepia (SEPIA) or monotone (MONOTONE)
mode before setting white balance.
The continuous shooting speed will drop when repeatedly making
continuous shots, when using certain recording media, or under
certain recording conditions.
Select the recording medium properly.
To watch images on a TV, set the TV's input mode or channel that
is appropriate for video playback.
The surface of the disk or card is damaged. It is recommended to
run check disk regularly on the PC, providing that there is no data
on the hard disk of the camera.
Do not select the sepia (SEPIA) or monotone (MONOTONE)
mode.
The sound of the hard disk drive may have been recorded if the
camera was moved suddenly during recording. Do not move or
shake the camera suddenly during recording.
Action
–
57
–
26
27
25
66
25
25
27
25
26
–
17
34
–
37
–