RUVATI Vienna RVH8272BL Installation Manual

3. From underneath the
deck/sink, slide the rubber
washer followed by the metal
washer all the way up the
threaded shank of the faucet
(Figure 3).
4. Screw the locknut all the way
up the threaded shank of the
faucet until tight. Then using a
Phillips- Head Screwdriver,
tighten the screws of the
locknut until tight (Figure 3).
5. Attach the hot and cold water
supply hoses to the faucet by
screwing the male end of
each hose with an adjustable
wrench or pliers to each of
the supply hose pipes
extending from the base of
the faucet.
CARE AND MAINTENANCE:
• Clean regularly with normal detergent and warm
water.
• Always make a habit of drying your sink after use
and buffing with a soft cloth. This will ensure that no
build up of lime scale or other mineral deposits can
occur.
• Clean the sink once a week using a non-abrasive
cleanser such as dish-soap and a clean soft sponge.
Rinse off with water and wipe dry.
• Never let soap or other household cleaners to d
on the surface of the sink. Most products contain
additives which will affect the finish of the sink.
Register your product at: www.ruvati.com/register
RUV�TI®
Address: 2712 Meister Pl, Round Rock, TX 78664
USA Phone: 1.855.478.8284
Email: support@ruvati.com
RUVATIUSA
www.ruvati.com
f
2.
+
3.
t;:;:
1\
4.
l ¼- 1
• Never use bleach solutions on the sink, as it is
harmful to stainless steel. If left on the sink too
long it can cause surface pitting.
• Never use a steel wool pad to clean your sink.
Doing so may damage the sink's surface and
cause discoloration.
• Minor scratching of the sin k's surface is
extremely difficult to avoid and is not something
to be unduly concerned about. These marks are
usually only superficial and can be removed with
ry
a proprieta stainless steel cleaner.
ry
• Use of rinse grids will reduce exposure of the
bottom of the sink to scratches.
''
RUVATIUSA
www.ruvati.com
RU\?ATI®
INSTALLATION GUIDE
CONCEALED
FAUCET SINK
RVH8272BL, RVH8272ST