Connecting Power; Connecting A Cable Or Satellite Box - Insignia NS-42L780A12 User Manual

Insignia 42"/46"/55" LCD HDTV, 1080p

Connecting power

To connect the power:
• Connect the AC power cord to the AC connector
on the back of your TV, then plug the other end
into a power outlet.
Notes
• Your TV should only be operated from the
power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
TV for an extended period of time.

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available. For
more information, see "What connection should I
use?" on page 10.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1 Make sure that your TV's power cord is
2 Connect the incoming cable from the cable wall
3 Connect an HDMI cable (not included) to one of
4 Plug your TV's power cord into a power outlet,
5 Go through the setup wizard on page 21.
www.insigniaproducts.com
unplugged, and all connected equipment is
turned off.
jack to the cable-in jack on the cable or satellite
box.
the HDMI jacks on the back of your TV and to
the HDMI jack on the cable or satellite box.
Cable or satellite box
Back of TV
turn on your TV, then turn on the cable or
satellite box.
Note
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
11