Subscribe to Our Youtube Channel
Related Manuals for Sanken SWJ Series
Summary of Contents for Sanken SWJ Series
- Page 1 Operation Manual SWJ Series PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 1/27...
- Page 2 4 Model Name Generic Examples, Options P.19 5 Terminal Connection P.20 6 Derating P.21 7 Mounting Method P.23 8 Dynamic Load P.25 9 Remote ON/OFF Controls P.25 10 Expected life P.26 11 Warranty period P.26 PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 2/27...
-
Page 3: Safety Precautions
Please strictly observe the specified environmental conditions, such as the environmental temperature and the temperature of the environment. Installation and installation methods are determined for each model. ● Do not install or install in a direction outside the designated direction. PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 3/27... - Page 4 AC input by turning off an external input breaker. Please contact your retailer or we. In the unlikely event of a fire, use a fire extinguisher for electric fire (powdered or ABC) and avoid fire extinguishment with water. PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 4/27...
- Page 5 Avoid use in such an environment because this could result in a failure. We strive to improve the quality and reliability of our products, but when using them, we ask the purchaser to be responsible for the safety design of the equipment. PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 5/27...
- Page 6 The peak output current and peak output power must not be exceeded. 9. When adjusting the output voltage, do not exceed the output voltage variable range,rated output current, rated output power, peak output current, peak output power. 10. AC90V and below requires output delirating. PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 6/27...
- Page 7 The peak output current and peak output power must not be exceeded. 9. When adjusting the output voltage, do not exceed the output voltage variable range,rated output current, rated output power, peak output current, peak output power. 10. AC90V and below requires output delirating. PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 7/27...
- Page 8 The peak output current and peak output power must not be exceeded. 9. When adjusting the output voltage, do not exceed the output voltage variable range,rated output current, rated output power, peak output current, peak output power. 10. AC90V and below requires output delirating. PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 8/27...
- Page 9 The peak output current and peak output power must not be exceeded. 9. When adjusting the output voltage, do not exceed the output voltage variable range,rated output current, rated output power, peak output current, peak output power. 10. AC90V and below requires output delirating. PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 9/27...
- Page 10 9. When adjusting the output voltage, do not exceed the output voltage variable range,rated output current, rated output power, peak output current, peak output power. 10. AC90V and below requires output delirating. 11. (100V / 200V) is (85～186Vac / 187～265Vac). PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 10/27...
-
Page 11: Dimensional Outline Drawing
(Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWJ075P-** ■ SWJ075P-**-L PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 11/27... - Page 12 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWJ075P-**-LC PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 12/27...
- Page 13 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWJ150P-** ■ SWJ150P-**-L PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 13/27...
- Page 14 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWJ150P-**-LC PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 14/27...
- Page 15 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWJ240P-** ■ SWJ240P-**-L PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 15/27...
- Page 16 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWJ240P-**-LC PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 16/27...
- Page 17 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWJ300P-** / SWJ330X-** ■ SWJ300P-**-L / SWJ330X-**-L ■ SWJ300P-**-L / SWJ330X-**-L PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 17/27...
- Page 18 (Unit: mm) 3. Dimensional Outline Drawing (The error without instruction is ±1.0mm) ■ SWJ300P-**-LC / SWJ330X-**-LC PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 18/27...
- Page 19 ● SWJ****-○○-LC ● ● SWJ****-○○ ● SWJ****-○○-L 150W ● SWJ****-○○-LC SWJ****-○○-R ● 240W SWJ****-○○-L-R ● ● SWJ****-○○-LC-R ● ● SWJ****-○○ ● SWJ****-○○-L ● 300W SWJ****-○○-LC ● SWJ****-○○-R ● 330W SWJ****-○○-L-R ● ● SWJ****-○○-LC-R ● ● PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 19/27...
-
Page 20: Terminal Connection
8： +V CN603 1： R/C+ B2B-XH-A XHP-2 SXH-001T-P0.6 Remote-Control (Option) R/C- BXH-001T-P0.6 (Option) ： (NOTE) ＊ 2.4 pin of CN101 nothing ＊ CN51and CN601 should be used at 5 A or less per pin(Rated output) PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 20/27... - Page 21 Load[%] Input Voltage [V] SWJ075P-** (D),(E) (A),(B),(C) Output current Load [%] Ambient temperature [℃] Reference：Derating Curve (Without Chassis & Cover) SWJ150P-** Output current Load [%] Ambient temperature [℃] Reference：Derating Curve (Without Chassis & Cover) PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 21/27...
- Page 22 SWJ300P-** (A),(B),(C) Output (D),(E) current Load [%] Load [%] Ambient temperature [℃] Reference：Derating Curve (Without Chassis & Cover) SWJ330X-** (A),(B),(C) Output current (D),(E) Load [%] Ambient temperature [℃] Reference：Derating Curve (Without Chassis & Cover) PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 22/27...
-
Page 23: Mounting Method
Ensure that the input FG terminal and the installation hole FG are earthed when installing the power supply. ※The protective earth conductor of the final device is not directly connected to the FG(CN101,mounting hole) in the power supply. PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 23/27... - Page 24 Because this product uses surface-mounting parts, please be aware of the installation method in which contact and stress are applied to the board at the time of installation. Please contact us about the option installation method. PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 24/27...
- Page 25 Output is turned on if voltage of 4.5～5.5V between RC+ and RC-(1-2pin of connector CN603) is applied. Output is turned off at voltage less than 0.8V or OPEN. Outputs are off under 0.8V or open. Please insert a current limiting resistor if the external DC power is high. PAN40010-001E-10 PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 25/27...
-
Page 26: Expected Life
② Earthquakes, lightning, fire, wind and flood damage, and other natural disasters ③ By modifying, disassembling, and repairing products other than ourselves, Cases due to reasons other than our responsibilities ④ External factors such as abnormal voltage or other connected equipment PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 26/27... - Page 27 171-002, Japan 530-0001, Japan Phone:+81-3-3986-6151 Phone: +81-6-6450-4400 Phone:+81-52-581-2767 Inquiry by E-mail sw.power@sanken-ele.co.jp ● This promotion sheet is as of October 2020. ● Please note that the contents are subject to change without notice for product improvement. PAN40010-001E-10 SANKEN ELECTRIC CO.,LTD. 27/27...
Need help?
Do you have a question about the SWJ Series and is the answer not in the manual?
Questions and answers