Download
Share
Print this page
  1. Manuals
  2. Brands
  3. NCE Manuals
  4. Remote Control
  5. Power Cab
  6. System reference manual

NCE Power Cab System Reference Manual

Hide thumbs Also See for Power Cab:
1
2
3
4
5

Advertisement

Quick Links

Download this manual
Power Cab
Power Cab
System Reference
System Reference
Manual
Manual
Rev 1.65B
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Power Cab and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NCE Power Cab

Summary of Contents for NCE Power Cab

  • Page 1 Power Cab Power Cab System Reference System Reference Manual Manual Rev 1.65B...
  • Page 2 Power Pro NCE system, you can use the Power Cab as a Pro Cab using the 4 wire coiled cord that is also supplied. BE CAREFUL An NCE P114 power supply (13.5VDC Regulated) is the supplied transformer for your system.

  • Page 3: Quick Start

    TRYING OUT YOUR POWER CAB #1 Assemble the Power Panel by screwing the black plate to the circuit board with screws provided. #2 Connect the long 7 foot flat cable from the Power Cab into the socket marked (on the drawing) POWER CAB (left socket).
  • Page 4 MANUFACTURER:___ After a moment the blank space after MANUFACTURER: will be filled in with “011” which is the NMRA code for NCE Corporation. All manufacturers have different codes. If you get a CAN NOT READ CV message the decoder is not responding. Check the locomotive, decoder and programming track wiring.
  • Page 5 By convention all DCC locomotive decoders are set to short address #3 at the factory. If your decoder has not had its address changed you will see a short address as the active address. Press 1 to set up the address. ACTIVE ACTIVE ACTIVE...