18. ENVIRONMENTAL CONCERNS..............41 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
1.2 General Safety This appliance is for washing and drying domestic- • type machine-washable and dryable laundry only. Do not use the dryer function if laundry has been • soiled with industrial chemicals. This appliance is designed for single household •...
Page 5
ENGLISH The operating water pressure at the water entry point • from the outlet connection must be between 0.5 bar (0.05 MPa) and 10 bar (1.0 MPa). The appliance maximum load is 8 kg. Do not exceed • the maximum load of each programme (refer to the "Programmes"...
The final part of the washer dryer cycle takes place • without heat (cool down cycle) to ensure that items reach a temperature that will not cause damage to them. Do not use high pressure water sprays and/or steam •...
Page 7
ENGLISH • Before connection to new pipes, pipes • Remove a detergent ball (if used) not used for a long time, where repair before starting a drying programme. work has been carried out or new • Do not use a detergent ball if setting a devices fitted (water meters, etc.), let non-stop programme.
• Remove the door catch to prevent for the disposal of Waste Electrical children or pets from becoming and Electronic Equipment (WEEE). trapped in the drum. • Dispose of the appliance in accordance with local requirements 3. PRODUCT DESCRIPTION 3.1 Appliance overview...
ENGLISH Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 10 bar (1.0 MPa) Maximum wash load Cotton 8 kg Maximum dry load Cotton 4 kg Synthetics 3 kg Spin Speed Maximum spin speed 1551 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 5.
1. Connect the water inlet hose to the We recommend that back of the appliance. you keep the packaging and the transit bolts for any transport of the appliance. 45º 45º 5. Put the plastic caps, that you find in 20º...
Page 11
ENGLISH 2. On the edge of a sink - Fasten the guide to the water tap or to the wall. The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm - min.
6. Position the hose directly to a built-in Connect the appliance to an earthed drain pipe in the room wall and tighten it socket. with a clamp. The power supply cable must be easily 5.3 Electrical connection accessible after installing the appliance.
ENGLISH • Iron Dry option Temperature touch button (Temperature) Spin reduction touch button (Spin) • No Spin On/Off push button (On/Off) • Rinse Hold 6.2 Display The digital indicator can show: • Programme duration (e. g. , washing and/or drying phase). •...
For more details, refer to Stand-by The appliance empties the paragraph in Daily Use chapter. water out automatically after 18 hours approximately. 7.2 Introduction Activate the No Spin option The options/functions are • Set this option to deactivate all spin not selectable with all phases.
ENGLISH heavily soiled or stained laundry with Each time you touch this button the time stain remover. value increases by 5 minutes. Pour the stain remover into compartment You cannot set all time values for different types of . The stain remover will be added in fabrics.
8. PROGRAMMES 8.1 Programme Chart Programme Maximum load Programme description Default temperature Reference spin (Type of load and level of soiling) Temperature range speed 8 kg 1600 rpm Eco 40-60 (Wash only mode) 40 °C White cotton and fast-coloured cotton.
Page 17
ENGLISH Programme Maximum load Programme description Default temperature Reference spin (Type of load and level of soiling) Temperature range speed 8 kg To rinse and spin the laundry. All fabrics, 1600 rpm except woollens and very delicate fabrics. Rinse Reduce the spin speed accordingly to the Cold type of laundry.
ENGLISH ■ Steam Refresh 1) Prewash and Stains option are not selectable together. 2) The Stain option is not available with a temperature lower than 40 °C. 3) Iron Dry option is not available. 4) Set the spin speed. Make sure it is suitable for the type of fabric being washed. If you set the No Spin option then only the drain phase is available.
Dryness Level Type of fabric Load Cottons and Linen up to 4 kg Extra Dry (bathrobes, bath towels, etc) For towelling materials Cottons and Linen up to 4 kg Cupboard Dry (bathrobes, bath towels, etc) For items to be stored Synthetics and mixed fab‐...
10. DAILY USE 10.1 Loading the laundry Maximum level for quantity of liquid 1. Open the appliance door. additives. 2. Put the laundry in the drum, one item Flap for powder or liquid detergent. at a time. 3. Shake the items before you put them Always follow the in the appliance.
Page 23
ENGLISH available options. When you activate an option, the indicator of the set option comes on. In case a selection is not possible, no indicator comes on and an acoustic signal sounds. 10.6 Starting a programme without the delay start Press the Start/Pause button to start the programme.
10.12 Opening the door The appliance starts the countdown of the delay start. When the countdown is completed, the If the temperature and level programme starts automatically. of the water in the drum are too high and/or the drum still...
ENGLISH The drum turns regularly to prevent the • You do not use the appliance for 5 creases in the laundry. minutes before you press the button Start/Pause The door lock indicator is on. The Press the On/Off button to activate door stays locked.
+ drying cycles, value time. for example: . After some calculated on a default load size. seconds the display shows the final time To have a good drying the value , that is the total duration of...
ENGLISH The display shows a time value, • The display shows the door calculated on the default load size. If the locked indicator amount of your laundry is more or less If you set only 10 minutes of than the default size, the appliance drying, the appliance adjusts automatically the time value performs only a cooling...
• Clean the drum, the gasket and the • Touch the Start/Pause button to start door with a wet cloth. the programme. • Set the rinse programme. If the appliance is frequently • Simultaneously press the used, carry out the CLE Temperature and the Dryness Level programme regularly.
ENGLISH 14.3 Detergent type and 14.4 Ecological hints quantity To save water, energy and to help protect the environment, we recommend The choice of detergent and use of that you follow these tips: correct quantities not only affects your wash performance, but also helps to •...
14.7 Items not suitable for • speed of the last spin • dryness level drying • type of laundry • weight of the load Do not set a drying programme for this laundry: 14.10 Additional drying • Synthetic curtains.
ENGLISH 15.4 Descaling Clean detergent dis‐ Every two months If the water in your area is penser hard or medium hard, we recommend that you use a Clean drain pump Twice a year water softener for washing filter machines. Clean the inlet hose Twice a year Regularly examine the drum to check for and the valve filter...
Make sure that no laundry remains Always obey the instructions between the seal and the door. that you find on the Use a moist cloth to wipe off any dirt or packaging of the product. water residue left behind in the door seal Check and remove objects (if there are after completion of program cycle.
Regularly check the drain pump filter and make sure that it is clean. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages.
ENGLISH WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 16. TROUBLESHOOTING WARNING! Refer to Safety chapters. 16.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation.
Page 36
• Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. The appliance does For this information, contact your local water authority. not fill with water prop‐...
Page 37
ENGLISH Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. The programme does •...
Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before The washing results you wash the laundry. are not satisfactory. • Make sure that you set the correct temperature.
ENGLISH 2. Disconnect the mains plug from the 5. Take out the laundry and then close mains socket. the appliance door. 3. Open the filter flap. 6. Close the filter flap. 4. Pull the emergency unlock trigger downward once. Pull it downward once again, keep it tensed and, in the meanwhile, open the appliance door.
Page 40
Remaining moisture at the end of the cycle. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture at the end of washing cycle. Values and programme duration may differ depending on different conditions (e.g.
Need help?
Do you have a question about the LWD661P86P and is the answer not in the manual?
Questions and answers