Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AEG 75857G-B
Summary of Contents for AEG 75857G-B
- Page 1 75857G-B User manual Gas hob...
-
Page 2: Table Of Contents
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. -
Page 3: Child Safety
Safety information Child safety • Only adults can use this appliance. Children must get supervision to make sure that they do not play with the appliance. • Keep all packaging away from children. There is a risk of suffocation and physical injury. •... - Page 4 Safety information • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If it is necessary, speak to the supplier. • Only use built-in appliances after you assemble the appliance into correct built-in units and work surfaces that obey the standards.
-
Page 5: Disposal Of The Appliance
Installation • The appliance must have the electrical installation which lets you disconnect the appli- ance from the mains at all poles with a contact opening width of minimum 3 mm. • If the fixing bracket is near to the terminal block, always make sure the connection cable does not come in contact with the edge of the bracket. -
Page 6: Gas Connection
Installation For appliances installed in the Republic of Ireland please refer to NSAI- Domestic Gas Instal- lation I.S 813 Current Edition Section 7- Permitted Locations of Appliance. Gas Connection WARNING! Any gas installation must be carried out by a GAS SAFE REGISTER installer. Make sure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. -
Page 7: Injectors Replacement
Installation Rigid connection: Carry out connection by using metal rigid pipes (copper with mechanical end). Injectors replacement Remove the pan supports. Remove the caps and crowns of the burner. With a socket spanner 7 remove the injectors and replace them with the ones which are necessary for the type of gas you use (see table in Technical Data section). - Page 8 Installation • The appliance must not be connected with an extension cable, an adapter or a multiple socket. There is a risk of fire. Make sure that the ground connection complies with the standards and regulations force. • The power cable must not touch any hot parts. •...
-
Page 9: Replacement Of The Connection Cable
Installation Brown - Live Connect the green and yellow (earth) wire to the terminal in the plug which is marked with the letter 'E' or the earth symbol , or coloured green and yellow. Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter 'N' or coloured black. -
Page 10: Possibilities For Insertion
Product description Possibilities for insertion Kitchen unit with door The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary. 30 mm min 20 mm (max 150 mm) 60 mm a) Removable panel b) Space for connections... -
Page 11: Control Knobs
Operation Control knobs Symbol Description no gas supply / off position ignition position / maximum gas supply minimum gas supply OPERATION Ignition of the burner WARNING! Be very careful when you use open fire in kitchen environment. Manufacturer decline any responsibility in case misuse of the flame Always light the burner before you put cookware. -
Page 12: Turning The Burner Off
Helpful hints and tips Burner cap Burner crown Ignition candle Thermocouple WARNING! Do not keep the control knob pushed for more than 15 seconds. If the burner does not light after 15 seconds, release the control knob, turn it into off posi- tion and try to light the burner again after minimum 1 minute. -
Page 13: Care And Cleaning
Care and cleaning WARNING! Use pots and pans with diameter applicable to the dimension of burner. Do not use cooking vessels on the hotplate that overlap its edges. Burner Diameters of cookware Triple Crown 180 - 260 mm Front Semi-rapid 120 - 220 mm Rear Semi-rapid 120 - 220 mm... -
Page 14: Cleaning Of The Spark Plug
What to do if… • Wash stainless steel parts with water, and then dry them with a soft cloth. • The pan supports are not dishwasher proof. They must be washed by hand. • When you wash the pan supports by hand, take care when you dry them as the enamel- ling process occasionally leaves rough edges. -
Page 15: Labels Supplied With The Accessories Bag
What to do if… Problem Possible cause Remedy • Burner cap and crown are • Make sure that the burner placed uneven cap and crown are in correct positions. The flame is blow out immedi- • Thermocouple is not heated •... -
Page 16: Technical Data
Technical data TECHNICAL DATA Hob dimensions Width: 680 mm Length: 510 mm Hob recess dimensions Width: 560 mm Length: 480 mm Heat input Triple Crown burner: 3.8 kW Semi-rapid burner: 1.9 kW Auxiliary burner: 1.0 kW TOTAL POWER: G20 (2H) 20 mbar = 10.5 kW G30 (3+) 28-30 mbar = 763 g/h G31 (3+) 37 mbar = 750 g/h Electric supply:... -
Page 17: Environment Concerns
Environment concerns NORMAL POWER NORMAL REDUCED NATURAL GAS LPG (Butane/Propane) POWER POWER G20 (2H) 20 mbar G30/G31 (3+) 28-30/37 mbar BURNER 28–30 inj. 1/100 inj. 1/100 37 mbar m³/h mbar Triple 0.362 Crown ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. - Page 20 www.aeg.com/shop...
Need help?
Do you have a question about the 75857G-B and is the answer not in the manual?
Questions and answers