LUCCI 246127 Installation Instructions

Installation Instructions
To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and
use of this product. Please keep instructions for future reference.
Warranty
• This luminaire is covered by a 5-year warranty. The warranty is from date of purchase, not the date of installation.
• If the luminaire is not assembled and installed by a licensed electrician, the warranty will be void.
• Please retain the proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries.
• Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
• This luminaire is not suitable for use with dimmer switches. Warranty will be void if the luminaire is used on the same
circuit, which has a dimmer switch.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
• This luminaire must be assembled and installed by a licensed electrician.
• All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
E.g. AS/NZS 3000 Electrical Installations.
• This luminaire is a Class I product and must be earthed during wiring and installation.
• This luminaire is rated IP65 this must be maintained during wiring and installation
• Select a suitable location for installation:
− This luminaire is suitable for wall and ceiling mount, follow the directional label during installation for wall
mounting only.
−
The mounting point must be able to support 2 times the weight of the luminaire.
−
This luminaire is protected against water penetration to IP65 standards, which is against low-pressure jets of
water from all practicable directions.
• The luminaire is not suitable to use with dimmer switches and must not be used with a circuit which has a dimmer.
• If the diffuser is damaged or cracked. For your safety, discontinue use and replace the luminaire, the diffuser is
non-replaceable.
• The colour temperature selection MUST be made during the installation, as the switch can only be accessed by a
licensed electrician.
• Take care not to pull any electrical wires during unpacking as this may damage the connection.
• Lay out all the components on a smooth surface and make sure no components are missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
• Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
1 | P a g e
BASE LED FLOOD LIGHT
SKU# 246127, 246128
Rated Voltage 220-240V~ 50Hz
v 1 . 0 ( 0 3 / 2 0 2 4 )