The information in this publication does not represent a commitment on the part of AML. AML shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material.
Page 3
Speaker Power Button Barcode Scanner Button Press and release the power button to turn the device on. Pressing the power button and releasing quickly, will turn off the display and put the device into sleep mode. To turn the device off, press and hold the power button until a pop-up is displayed with the options to “Power off”...
Page 4
Non-Handle Version The LED flashlight may be activated by pressing the Function Key (Fn) Dual LED Flashlight and then the ENTER key. Repeat the procedure to turn it off. Scan Engine Exit Window Camera Optional Lens Optional Camera Flash Battery Compartment Hand Strap Attachment Points...
Page 5
Handle Version Dual LED Flashlight Scan Engine Exit Window Barcode Scanner Trigger Flashlight Trigger Cradle Connector Battery Compartment Audio Jack Lanyard Connection...
Installing/Replacing the Battery Please note that the only battery to be used with your StrikerX is AML Part No. 180-7800. Using any other battery will void any warranty or maintenance plan and can result in malfunction, over- heating, or risk of fire.
Setting up a Wi-Fi Connection Locate and select the Settings icon on the home screen. In the Settings menu, select Network & Internet. Select Internet. Make sure the Wi-Fi button is toggled to the ON position. Select a network and then follow the prompts to enter the proper credentials to allow access.
If the StrikerX is going to be left idle for any significant period of time, it is better to completely power down the device by holding the power button down until a prompt appears that will give you the option to “Power off”...
Battery Care Adequate battery life is crucial to the performance of mobile computing devices. Here are some tips for prolonging the life of your Striker batteries: • Charging your batteries at room temperature is recommended. Charging at lower temperatures will require a longer charge time and charging below freezing can permanently damage battery cells, making them more sensitive to failure when exposed to vibration and other stresses.
Page 10
Sanitizing Your StrikerX The best way to clean and sanitize your AML mobile computer or kiosk is to use a diluted solution of three-parts water and one-part rubbing alcohol. Rubbing alcohol is a diluted form of isopropyl alcohol. It typically contains 70% isopropyl alcohol with the balance consisting of other denaturants.
Page 11
ACC-7725 Charging Cradle Charges one StrikerX and one spare battery. ACC-7736 Mobile Charging Cradle Designed for vehicle mount applications Charges one StrikerX and one spare battery. ACC-7037 Four Position Battery Charger Charges four batteries simultaneously. ACC-7715-PS Inline Charger Charges one StrikerX.
Page 12
Warranty Protection and Technical Support If your StrikerX mobile computer is in need of repairs, you may request an RMA number (Return Material Authorization) by calling 877-842-3990, between 8:00 am and 5:00 pm, (CST) Monday-Friday. You may also request an RMA number online at: https://www.amltd.com/RMA-...
Need help?
Do you have a question about the StrikerX and is the answer not in the manual?
Questions and answers