Page 1
CAROMAX 2001 Use and Operating Instructions SERIAL NUMBER M__________ - M__________...
Page 2
It is the customer's responsibility to ensure that, in the event that this document undergoes chan- ges by MAXIMA SpA, only updated versions of the Manual are actually present at the point of use. THE OFFICIAL LANGUAGE CHOSEN BY THE MANUFACTURER IS ITALIAN.
CAROMAX 2001 Technical characteristics Technical Data Core drill type CAROMAX 2001 Power input 2000 W Voltage 230 V Current input 9,4 A Frequency 50-60 Hz Machine weight 7,4 kg Speed / impact force under load 1. gear 420 - 530 rpm / 8480 - 10600 impacts/min 2.
Inserting and changing tools Applications The chuck of the diamond core drill with G 1/2" exter- The carotatrice diamantata CAROMAX 2001 is sui- nal thread is located on the drilling spindle. Only use table for dry diamond core drilling with dust extraction suitable and high-quality tools.
CAROMAX 2001 switching the machine on and off. Gearshift Switch the machine off immediately and release the The machine features a 3-speed-gearbox, which al- tool by turning it clockwise and counterclockwise lows the optimum speed to be set for each drilling dia- with a suitable open-end wrench.
In this case, the drilling progress be- comes less and less until finally no more material is Take the power tool to a MAXIMA Service Centre as removed. This can only be corrected by briefly dril- soon as possible to ensure that its serviceability is ling in the MARAVF/MARAVD sharpening plate.
Keep children and bystanders away while The warranty is valid only if genuine MAXIMA to- operating a power tool. Distractions can cause ols, consumables, accessories and spare parts are you to lose control.
Page 9
CAROMAX 2001 c) Do not expose power tools to rain or wet con- ignore tool safety principles. A careless action ditions. Water entering a power tool will increase the can cause severe injury within a fraction of a second. risk of electric shock.
Safety helmets off the front and rear drilling area. • Have the cord and the plug exchanged exclusi- vely by MAXIMA or a MAXIMA customer service. Breathing mask • Only use MAXIMA diamond core bits with dril- ling dia. 52 - 250 mm.
CAROMAX 2001 Normal setting: a = 14.4 m/s tained, the values may differ. h,ID Uncertainty: K = 1.5 m/s This may increase the exposure level over the entire working period. Compressor setting: a = 15.0 m/s h,ID For an accurate estimation of the exposure level, the Uncertainty: K = 1.5 m/s...
Need help?
Do you have a question about the CAROMAX 2001 and is the answer not in the manual?
Questions and answers