Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Verkada ACC-MNT-REC-2
Summary of Contents for Verkada ACC-MNT-REC-2
- Page 1 Install Guide ACC-MNT-REC-2 Recess Ceiling Mount...
-
Page 2: Product Models
Verkada product is granted under this document. This document may not be sold, resold, licensed or sublicensed and may not be transferred without Verkada’s prior written consent. No part of this document may be reproduced in whole or in part without the express written consent of Verkada. -
Page 3: Compatible Products
M4x0.7 Machine Screw (4 pcs) Cover Length: 8mm Drive: #2 Phillips What you’ll need Compatible products For a list of compatible products, A Verkada Indoor Dome Camera ● please visit: A T10 Torx Security Screwdriver ● A #2 Phillips screwdriver or power drill https://docs.verkada.com/docs/... - Page 4 Introduction Overview Order of assembly: Ceiling Up to 50mm thickness Recess Ceiling Mount Bracket Mount plate (Sold separately, with camera) Verkada Indoor Dome Camera (Sold separately) Recess Ceiling Mount Cover...
- Page 5 Installation Mounting (1/5) Retrieve the indoor dome camera. Unscrew the screws on the cover, using the T10 Torx Security Screwdriver. Lift the cover and bubble and set them aside. Loosen the mount plate thumb screws using the T10 Security Screwdriver. Rotate and lift the camera to separate it from the mount plate.
- Page 6 Installation Mounting (2/5) Identify the desired mounting location on the ceiling and adhere the Hole Cutout Template. Cut a hole, following the outline of the template, using a utility knife. Bring the Ethernet cable through the hole. Thread the Ethernet cable through the assembly (mount plate and the Recess Ceiling Mount Bracket).
- Page 7 Installation Mounting (3/5) Connect the Ethernet cable to the camera. Place the camera over the mount plate thumb screws and twist clockwise. Tighten the mount plate thumb screws with the T10 Security Torx Screwdriver.
- Page 8 Installation Mounting (4/5) Carefully place the clear bubble back onto the camera base. The magnets will guide the bubble into position. Align the screw positions on the camera cover to the corresponding holes on the camera base and hold it in place. Tighten the two T10 Torx Security Screws.
- Page 9 Installation Mounting (5/5) Align the captive screw on the plastic cover with the blue indicator on the mounting bracket. Twist to lock the cover. Tighten the plastic cover with the T10 security screwdriver.
- Page 10 Appendix Support Thank you for purchasing this Verkada product. If for any reason you're experiencing issues or need assistance, please contact our 24/7 Technical Support Team immediately. Sincerely, The Verkada Team verkada.com/support...
Need help?
Do you have a question about the ACC-MNT-REC-2 and is the answer not in the manual?
Questions and answers