SUBMERSIBLE SYSTEMS SPARE AIR User Instructions

Emergency breathing device for industrial safety applications
Hide thumbs Also See for SPARE AIR:

Advertisement

Quick Links

SPARE AIR
USER'S INSTRUCTIONS
EMERGENCY BREATHING DEVICE
FOR INDUSTRIAL SAFETY APPLICATIONS
SUBMERSIBLE SYSTEMS, INC.
Phone: (714) 842-6566
www.submersiblesystems.com
THE LEADER IN SELF-RESCUE BREATHING SYSTEMS
7/24
1
G:\Mktg\IS\IS user inst

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPARE AIR and is the answer not in the manual?

Questions and answers

Summary of Contents for SUBMERSIBLE SYSTEMS SPARE AIR

  • Page 1 SPARE AIR USER’S INSTRUCTIONS EMERGENCY BREATHING DEVICE FOR INDUSTRIAL SAFETY APPLICATIONS SUBMERSIBLE SYSTEMS, INC. Phone: (714) 842-6566 www.submersiblesystems.com THE LEADER IN SELF-RESCUE BREATHING SYSTEMS 7/24 G:\Mktg\IS\IS user inst...
  • Page 2: Table Of Contents

    • SPARE AIR is packaged fully assembled and is ready to use after it has been filled with air. User needs to purchase a Refill Adapter – see options below. Other refill options are available such as a Hand Pump, and small portable compressors.
  • Page 3: Optional Accessories

    (Use a high-pressure, breathing air quality air compressor designed to fill air systems.) WARNING: If the SPARE AIR Check Valve Refill Port or Refill Adapter threads are damaged or worn these parts will require replacement. Continued use may cause injury.
  • Page 4: Mounting Instructions

    MOUNTING INSTRUCTIONS FOR HOLSTER WITH VELCRO BACKING: CAUTION: SPARE AIR units should be mounted on a flat surface. It is not recommended to mount them on the ceiling or anywhere above waist level to protect passengers against impact if they come unattached.
  • Page 5: Using Spare Air

    1 to 1 vinegar & water solution for 3 hours to loosen any corrosion. Place SPARE AIR in a protective container (plastic bag or box) to keep unit clean and to secure loose parts. Pack in your check or carry-on luggage.
  • Page 6: Service Information

    If a leak or damage is found at any point the unit should be referred for Overhaul Service. • No matter how often the unit has been used, or even if the unit has not been used at all, the Spare Air requires tank inspection and regulator overhaul every 5 years.
  • Page 7: Routine Care & Storage

    NOTE: Industry guidelines recommend replacing air in cylinders annually. SERIALIZATION: All SPARE AIR systems are identified with individual serial numbers. Serial numbers are located on the regulator to the right of the mouthpiece. SPARE AIR SPECIFICATIONS...

Table of Contents