Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SUBMERSIBLE SYSTEMS Spare Air 600
Summary of Contents for SUBMERSIBLE SYSTEMS Spare Air 600
- Page 1 OWNER’S MANUAL The Diver’s Reserve Parachute...
-
Page 2: Table Of Contents
This owner’s manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine readable form without prior consent in writing from Submersible Systems, LLC. © 2020 Submersible Systems, LLC. -
Page 3: General Precautions & Warnings
GENERAL PRECAUTIONS & WARNINGS ! Do not use product until you have read and understand instructions and precautions. ! Submersible Systems, LLC promotes responsible diving practices and the recommendations that have been promoted by all International Training agencies. ! SPARE AIR is shipped empty. Fill prior to use. -
Page 4: How Spare Air Works
HOW SPARE AIR WORKS A. Mouthpiece - High quality silicone mouthpiece. B. Purge Button - Clears the regulator and empties the cylinder. C. Serial Number D. Regulator - Our simple rugged design utilizes the same time proven technology found in typical regulators used by SCUBA divers around the world. -
Page 5: How To Fill Spare Air
HOW TO FILL SPARE AIR WARNING: If the SPARE AIR Check Valve Refill Port or Refill Adapter threads are damaged or worn these parts will require replacement. Continued use may cause injury. CAUTION: DO NOT stand directly over SPARE AIR regulator while filling. CAUTION: Ensure the regulator is firmly attached to the cylinder (hand tight, no tools required). -
Page 6: How To Mount Spare Air
HOW TO MOUNT SPARE AIR WARNING: DO NOT attach or mount the SPARE AIR Holster to your weight belt OR block integrated weight pouches. WARNING: DO NOT attach or mount the SPARE AIR Holster to your BC in a way that will interfere with the inflation of the BC. -
Page 7: Accessories
SCUBA tank for easy refilling. SPARE AIR HOLSTER #976 for the SPARE AIR 600/600-N PRE-DIVE 1. Check Pressure Indicator. Do not dive with SPARE AIR unless it is completely full. 2. Check for obvious physical damage, such as broken or loose parts. -
Page 8: Using Spare Air
USING SPARE AIR 1. Upon ascent, pull D-ring on flap of Holster to open. CAUTION: Begin ascending immediately to avoid using valuable time and air. 2. Grab SPARE AIR regulator head and pull out of the Holster. This action will release the Mouthpiece Cover. -
Page 9: Routine Care & Maintenance
! SPARE AIR should be serviced annually by an Authorized SPARE AIR Dealer or by Submersible Systems to assure proper performance. It cannot be assumed that a regulator is in good working order on the basis that it has received little or no use. -
Page 10: Traveling
TRAVELING When traveling on commercial aircraft, cylinders must be VISIBLY empty and removed from regulators. Practice removing and assembling prior to packing for a trip. 1. Purge SPARE AIR until empty of air. 2. Hold SPARE AIR upside down and remove regulator from cylinder (regulator is attached hand tight) by turning counter-clockwise. -
Page 11: Warranty Information
Submersible Systems, LLC Limited One-Year Warranty Statement of Warranty Submersible Systems, LLC (SSLLC) guarantees, to the original purchaser only, that the product purchased will be free of defects in materials and/or craftsmanship under normal SCUBA use for one year from date of purchase provided proper care has been performed as prescribed by the owner's manual supplied along with the product. - Page 12 S A V I N G L I V E S SYSTEMS, LLC F O R 4 0 Y E A R S 7413 Slater Avenue Huntington Beach, CA 92647 USA Phone: 714-842-6566 www.spareair.com 9001:2015 Certified 0120 Dealer/Distributor Stamp: 098128NX-18 Rev. 24...
Need help?
Do you have a question about the Spare Air 600 and is the answer not in the manual?
Questions and answers