Recording With Wireless Mic Uno; Preparing The Receiver And The Microphone - Easypix MyStudio Wireless Mic Uno User Manual

Recording with Wireless MIC UNO

Preparing the receiver and the microphone

1. Connect the receiver to your camera, smartphone,
laptop or recording device.
This can be done by using either the 3.5mm cable for
connection to a DSLR camera for example, or by
using the USB-C cable.
2. Receiver:
Use the USB Type C cable to connect your mobile
phone to the receiver. Press and hold the power
button on the receiver - the battery indicator will
flash once and the receiver screen will light up,
indicating that the unit is switched on and ready to
connect to the MIC. The receiver screen will display
the MIC signal, indicating a successful connection.
3. Microphone:
Press and hold the power button on the MIC, the
connection indicator will flash green to indicate that
the unit is switched on and ready to connect to the
receiver. The connection indicator and ENC indicator
are remain on when the receiver is connected.
EN
13