12 | Chapter 3: The Radio; Listening To The Radio - Sony LBT-D570 Operating Instructions Manual

Chapter 3:
the
a terelfe)
Listening to the Radio
Presetting Radio Stations
Playing Preset Radio
Stations
12 | Chapter 3: the Radio
SSS eee)
Listening to the Radio
When you want to play a radio program,
you can have the tuner automatically scan
the radio frequencies and tune in the
stations with clear signals. This feature
saves you time in searching for stations
with clear signals.
However, stations with weak signals may
be skipped by automatic tuning. Manually
tune in stations with weak signals.
SYSTEM
POWER >ON
STEREO/
MONO
2
1
1 Press TUNER/BAND repeatedly until
the band you want appears and in the
display.
As you press this button, the band
changes as follows:
FM +—> AM
2 Press TUNING MODE repeatedly until
"AUTO" appears in the display.
3 Press TUNING +/- buttons (or 0&1 /(8)
on the remote).
The tuner starts scanning radio ~
frequencies, and stops when it finds a
clear station. "TUNED" appears in the.
display. "STEREO" also appears if the |
FM station tuned in is broadcasting in
stereo.
4k you don't want to listen to the
selected station, press TUNING +/- (or
(31 /(8) on the remote) buttons to restart
the scan.
When the desired station is not
tuned in
Automatic tuning may skip the stations
with weak signals and continue scanning
without a stop. In this case, tune in the
station manually.
1 Press TUNING MODE repeatedly until
"MANUAL" appears in the display.
2 Press TUNING +/- buttons repeatedly
until the desired station is tuned in.
To improve AM broadcast reception
Reorient the supplied AM loop antenna for
AM.
aD
AM
To change the AM tuning interval
The AM tuning interval is preset to 10 kHz
at the factory. If you need to change the
interval, do as follows:
1 Turn on the power.
2 Change the band to AM.
3 Turn off the power.
4 Turn the power back on while pressing
ENTER/NEXT.
After changing the AM tuning interval,
reset the preset radio stations. To reset the
interval to the factory setting, follow the
same procedure.
When an FM program is not received clearly
Press STEREO/MONDO on the unit so that
"MONO" appears in the display. There will
be no stereo effect, but the reception will
improve. Press STEREO/MONO again to
restore the stereo effect.
One Touch Play feature
Press TUNER/BAND when the power is
off or when you are listening to another
sound source.
You can listen to the last received station
without pressing any other buttons.
Note
When you listen to a sound source other
than the tuner, you can select the tuner by
pressing TUNER/BAND (Automatic © -
Source Selection). =