Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HAI 68A01-1
Summary of Contents for HAI 68A01-1
- Page 1 Model 68A01-1 OPERATING MANUAL 3-AXIS GIMBAL VARI-FOCAL INDOOR DOME CAMERA...
-
Page 2: Table Of Contents
Contents Features Specifications Dimension Part Name and Descriptions Base Installations Connection 3-Axis Gimbal Adjustments How to Open the Gimbal Cover Vari-focal, DC Auto Iris Lens Adjustments OSD Menu Instructions Document Number 68I01-1 Rev. A January 2008... -
Page 3: Features
Features 1/3” CCD 550 TV Lines 3.8~9.5mm DC Auto Iris Lens 0.1 Lux(Normal), 0.002 Lux(DSS On) Separate Camera Control Board -OSD Menu -Service Monitor Output 12VDC/24VAC Dual Voltage 4” Polycarbonate Bubble 3-Axis Gimbal Flush Mount Housing w/ Surface Mount Plate in single package Aluminum Mounting Accessories (Option) Compact size... -
Page 4: Specifications
Specifications Description Indoor Dome Camera Video Formats NTSC Image Sensor 1/3" CCD Sync System Internal Scanning system 525 Lines, Interlaced 625 Lines, Interlaced Electronic Shutter 1/60 ~ 1/100,000 1/50 ~ 1/100,000 Main Video Output 1.0 Vp-p Composite, 75 ohm Service Monitor Output 1.0 Vp-p Composite, 75 ohm Horizontal Resolution 550 TV Lines... -
Page 5: Dimension
Dimension (Unit:mm) 83 109 99 146... -
Page 6: Part Name And Descriptions
Parts Name and Descriptions 1. Lens 2. Power Input Connector 12VDC/24VAC Dual Voltage 3. Video Output Connector – BNC 4. Service Monitor Output Connector 5. Camera Control Board 6. Safety Wire 7. Bubble 8. Dome Cover Ring 9. Flush Mount Base 10. -
Page 7: Base Installations
Base Installations 1. Remove dome cover by loosening 3 screws (Torx M4x9) Use Torx wrench provided with the package. 2. Surface Mount: Using four ST4x30 screws, mount surface plate to a sturdy surface. Using four M4x10screws, affix flush mount base to surface plate. (For flush mount application, disregard this step) 3. -
Page 8: Connection
Connection 12VDC/24VAC CCTV Monitor Service Monitor Output Service Monitor · Power connection - Requires 12VDC or 24VAC. - Power connections: Requires 12VDC or 24VAC. · This camera is supplied with a second video output on the camera module. - This camera is supplied with a second video output on the To use this feature along with a service monitor, a second monitor and cable is camera module. -
Page 9: 3-Axis Gimbal Adjustments
3-Axis Gimbal Adjustments The Gimbal mechanism yields maximum rotation and placement as shown below 1. P an 355 ° 3. Horizontal 2. Tilt 85 ° Rotation 355° How to Open the Gimbal Cover This Dome Camera has a vari-focal lens integrated inside the Gimbal. -
Page 10: Vari-Focal, Dc Auto Iris Lens Adjustments
Vari-focal, DC Auto Iris Lens Adjustments 1. Remove the Gimbal cover from the Gimbal base. Zoom Focus Gimbal Cover OSD Menu Button 2. Loosen Zoom & Focus screws and make necessary adjustments as shown. Field of View: Telephone (T) to Wode (W) Focus: Near(N) to infinity(∞) Adjust Focus Adjust Angle for Field of View... -
Page 11: Osd Menu Instructions
OSD Menu Instructions Menu & Setting Details Main Menu BRIGHTNESS 1-70(25) LENS SHUTTER BRIGHTNESS 1-70(25) MANUAL SHUTTER 1/60-1/120.000 WHITE BALANCE MANUAL 0-256(32) BLUE 1-256(39) BACKLIGHT DOWN MIDDLE LEFT RIGHT HIGH MIDDLE BRIGHTNESS 1-70 (25) HIGH MIDDLE HIGH AUTO LIMIT x2 - x128(x8) - Page 12 OSD Menu Instructions Main Menu CAMERA ID SPECIAL COLOR COLOR AUTO SYNC MOTION DET AREA SEL AREA1,2,3, or 4 AREA STATE ON/OFF DOWN LEFT RIGHT PRIVACY AREA SEL AREA1,2,3, or 4 AREA STATE ON/OFF DOWN LEFT RIGHT MIRROR LEVEL 0-31(8) SHARPNESS RESET RETURN...
- Page 13 OSD Menu Istructions Main Menu A. LENS This function is used to adjust the brightness of the screen. - DC : The brightness can be adjusted in DC mode. The brightness can be adjusted within the range of 1 to 70. B.
- Page 14 OSD Menu Istructions...
- Page 15 OSD Menu Istructions...
- Page 16 OSD Menu Istructions...
Need help?
Do you have a question about the 68A01-1 and is the answer not in the manual?
Questions and answers