Related Manuals for HAI 68A01-1
Summary of Contents for HAI 68A01-1
- Page 1 Model 68A01-1 OPERATING MANUAL Day/Night Dome Camera (Indoor/Outdoor) Before installing and using the camera, please read the instructions thoroughly and retain them for reference. Document Number 68I01-1 Rev. B February 2010...
-
Page 2: Specifications
Features 1/3" SONY Super-HAD 3.7-12mm Auto Iris Lens Water resistance IP 66 protection Wide Range Viewing 3D Covert Bracket Design E-Z Installation with Attached Cap Design Anti-Scratch Cover Coating Specifications Description Indoor Dome Camera 12VDV / 24VAC Dual Voltage Power requirements Internal / Line-lock Auto Detect... -
Page 3: Part Name And Descriptions
Part Name and Descriptions A. Camera B. PC Assembly C. Back Conduit Entry D. Side Conduit Entry E. Housing Mounting Holes F. Security Screws G. Conduit Entry Plug H. Inner Cover Adjustment Installation 1. Remove dome cover by loosening 4 security screws (use wrench provided). 2. - Page 4 Caution 1. Do not touch the surface of the image sensor. If it is touched accidentally, it must be cleaned using a cloth moistened with alcohol. 2. Before operation, ensure that the supply voltage is correct as specified. 3. Avoid focusing on the sun directly. 4.
- Page 5 Dip Switches 5-8 adjust the delay time for when the camera switches from color to black and white under IR illumination. Adjusting the Camera Zoom and Focus To adjust the zoom and/or focus of the camera: 1. Loosen the zoom ring thumbscrew 2.
Need help?
Do you have a question about the 68A01-1 and is the answer not in the manual?
Questions and answers