Simplicity 7000 Series Operator's Manual page 17

SSimniidiMf
Normal Care
A
CAUTION
The positive battery terminal can be
easily shorted to the tractor frame
by a wrench or other tool. To avoid
this problem, always disconnect the
negative cable first and connect it
last.
A
1 . Remove cables, negative cable first.
2. Loosen battery clamp.
3. Remove battery.
4. Scrub battery, cables, and battery
compartment. Use baking soda
and water.
5. Clean terminals and cable clamps
with wire brush.
6. Install battery and tighten battery
clamp.
A
7. Install cables, positive cable first.
8. Coat cable clamps and terminals
with grease or vaseline.
Figure 12. Clean Battery and Cables (100-Hour Care)
16