Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tecno Piu PTO 01
Summary of Contents for Tecno Piu PTO 01
- Page 1 PTO 01 PTO 02 PTO 03 PTO 05 Designation: LATHE CHUCK GUARD Model: PTO 01 / PTO 02 / PTO 03 / PTO 05 Tecno Più Srl Via Tempio Malatestiano, 21 47921 Rimini (RN) Tel. +39 0721 476381 website: www.tecnopiu.it...
-
Page 2: Table Of Contents
SUPPLY STATUS AND PREPARATION PREPARATION ASSEMBLY INSTALLATION ELECTRICAL CONNECTION START-UP RESPONSIBILITY OF THE INSTALLER WORKSTATION BEFORE STARTING ANY WORK MAINTENANCE FOR INSTALLATION TECHNICIAN GENERAL WARNINGS Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-2... - Page 3 TABLE OF CONTENTS DECOMMISSIONING WASTE DISPOSAL AND PACKAGING SPARE PARTS AND SERVICE Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-3...
-
Page 4: How To Consult The Instruction Manual
The information in this warning indicates an OBLIGATION and must be scrupulously ob- served. The information in this warning indicates a DANGER or RESIDUAL RISK and must be scrupulously observed. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-4... -
Page 5: How To Use The Instruction Manual
Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-5... -
Page 6: Glossary
• Guard A part of the machine used in such a way as to offer protection by creating a physical barrier. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-6... - Page 7 Part of a control system that responds to safety-related input signals and generates safety-related output signals. • Safety function Function of a machine whose failure can lead to an immediate increase in risk(s). Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-7...
-
Page 8: Safety Decals
Prohibition to change the status of the parts. switch. Keep hands clear. Prohibition of placing heavy loads. No smoking or open flames. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-8... -
Page 9: Mandatory Pictograms
Safety shoes must be worn. Obligation to ensure grounding. Obligation to wear protective helmet. Safety goggles must be worn. Protective clothing must be worn. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-9... -
Page 10: General Safety Warnings
• For operation and maintenance of commercial components mounted on the safety component, please refer to the manuals enclosed or retrievable online. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-10... -
Page 11: Limitations And Liability
Failure to carry out the maintenance required by this manual - Faults and/or breakage of the machine on which it is installed that cannot be attributed to its malfunction. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-11... -
Page 12: Safety Part Information
DESCRIPTION OF THE SAFETY PART The safety component: mod. PTO 01 / PTO 02 / PTO 03 / PTO 05 allows the operator to protect himself from direct contact with the upper part of the self-centring spindle and from the projection of coolant generated during machining. - Page 13 For proper use of the safety component, good maintenance and cleaning of the compo- nent must be scrupulously observed. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-13...
-
Page 14: Reasonably Foreseeable Improper Use
It is forbidden to use the safety component without the appropriate personal protective equipment. The operator must use the personal protective equipment intended for use with the machine. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-14... -
Page 15: Microswitches
There are different types of microswitches including, for example, key switches, hinge switches, magnetic switches, etc. DO NOT use the safety component for normal machine stop. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-15... -
Page 16: Copy Of The Declaration Of Conformity
47921 Rimini (RN) - ITALY 47921 Rimini (RN) - ITALY Legale rappresentante Rimini, Legal representative Représentant légal Representante legal Rechtsvertreter Законный представитель Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-16... -
Page 17: Transport And Handling
(cardboard and expanded polystyrene plugs). Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-17... -
Page 18: Installation And Commissioning
3. the guard must be fixed to the machine as in - drawing (6); 4. Proceed with checking the adjustment and centring of the guard and the measurements as in draw- ing (7); Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-18... -
Page 19: Electrical Connection
Installation must be carried out by appropriately trained technical personnel. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-19... -
Page 20: Use And Maintenance
5 - USE AND MAINTENANCE WORKSTATION The safety guard PTO 01 / PTO 02 / PTO 03 / PTO 05 protects the operator from the front, observe the workstation as shown in - drawing (11). BEFORE STARTING ANY WORK Before starting any work, it is necessary: 1. -
Page 21: Maintenance For Installation Technician
The protective screen tends to lose its initial transparency with time and wear, so its periodic replacement is recommended. IT IS FORBIDDEN TO USE ALCOHOL, SOLVENTS OR AGGRESSIVE DEGREASERS. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-21... -
Page 22: Additional Instructions
If it is necessary to take the safety component out of service, it is also necessary to carry out all necessary operations to take the machine itself out of service, because, THE MACHINE IS NOT IN SAFE CONDITIONS. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-22... -
Page 23: Spare Parts And Service
• Type of guard; • Serial number; • Date of purchase; • Moreover, supply all the information that concerns the experienced inconvenience. Rev. 01 PTO 01 / PTO 02 / PTO 03 / PTO 05 LATHE CHUCK GUARD p. I-23... - Page 24 Tecno Più Srl Via Tempio Malatestiano, 21 47921 Rimini (RN) Tel. +39 0721 476381 website: www.tecnopiu.it...
Need help?
Do you have a question about the PTO 01 and is the answer not in the manual?
Questions and answers