Advertisement
Quick Links
What's Included • Ce qui est inclu • Qué está incluido
Plastic Junction Box
Boîte de jonction en plastique
Plastic Junction Box
ST4x25-SUS Screws (4×)
Vis de Montage
Tornillo de Montaje
• Drill
Perceuse / Taladro
Drilling Template
Gabarit de perçage
Plantilla de perforación
Black Rubber Covers (3×)
Couvercles en caoutchouc noir
Cubiertas de goma negra
• Screwdriver
Tournevis / Destornillador
EN / FR / ES
AJLP Series
Mounting Anchors (4×)
Ancrage de Montage
Anclaje de Montaje
ST3x16 Screws (4×)
Vis ST3x16
Tornillos ST3x16
1
Advertisement
Related Manuals for Lorex AJLP Series
Summary of Contents for Lorex AJLP Series
- Page 1 EN / FR / ES AJLP Series What's Included • Ce qui est inclu • Qué está incluido Plastic Junction Box Drilling Template Mounting Anchors (4×) Boîte de jonction en plastique Gabarit de perçage Ancrage de Montage Plastic Junction Box Plantilla de perforación...
- Page 2 Dimensions • Dimensions • Dimensiones Ø 0.19"/4.8 mm 4.17" 5.18" 106.0 mm 131.6 mm 4.17" 5.18"/131.6 mm 106.0 mm 2.05" 52 mm Weight/Poids/Peso: 0.53 lbs (0.24 kg)
- Page 3 EN - Installation Install in an area that supports the total weight of the camera and accessories. Place the drilling template where you want to install the junction box, then install the provided anchors.
- Page 4 Insert a flat-head screwdriver into the knockout slot and chisel around the edge to remove it; if burrs remain, use a deburring tool (not included) to smooth the edges and repeat for all necessary slots. Note: Please complete step 2 on a flat surface and chisel the knockout slot away from your body.
- Page 5 Install the junction box with the provided ST4x25-SUS screws...
- Page 6 Insert the cable through the knockout hole. Open the rubber over along the slit. Insert the cable into the rubber cover...
- Page 7 Install the rubber cover into the knockout hole. Repeat this step for each knockout hole you want the cable to enter or exit from. You can use the knockout holes on the box cover or any other knockout slots, as shown below.
- Page 8 Secure the junction box with the ST3x16 screws...
- Page 9 Install the camera side-by-side with the junction box using the camera's anchors and screws (not included). Note: Do not mount the camera directly on the junction box. Instead, install them side-by-side.
- Page 10 FR - Installation Installer la caméra dans un endroit qui peut supporter le poids de la caméra et des accessoires. Placez le gabarit de perçage à l'endroit où vous souhaitez installer la boîte de jonction, puis installez les chevilles fournies. Insérez un tournevis à...
- Page 11 ES - Instalación de la cámara Instálelo en un área que pueda soportar el peso total de la cámara y los accesorios. Use the drill guide to select your junction box configuration. Coloque la plantilla de perforación donde desee instalar la caja de conexiones, luego instale los anclajes proporcionados.
- Page 12 Para ver la tabla de compatibilidad de productos, visite: lorex.com/compatibility Copyright © 2024 Lorex Technology Inc. As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
Need help?
Do you have a question about the AJLP Series and is the answer not in the manual?
Questions and answers