Page 1
USER MANUAL PN 6-1000-01-AU REV A NICE1 COLD + COMPRESSION THERAPY SYSTEM...
Page 2
Thank you for choosing the NICE1 Cold + Compression THIS Therapy System. IS NICE Warning: Read entire user manual before using NICE1. Refer to the individual wrap guides for specific information regarding wrap use. Rx Only...
3. Indications for use 4. Contraindications, cautions, and warnings 5. Unpacking NICE1 6. Environmental conditions 7. How to set up your NICE1 for therapy COMPRESSION 8. Operating instructions Provides intermittent and dynamic compression 9. Maintenance and cleaning as prescribed by a physician.
◦ Low: the NICE1 inflate to 13 mmHg for 2 minutes and then deflate to 5 mmHg for 30 seconds. • Cooling Temperature Range: ◦ Level 1 = 58F (14.4C) Level 4 = 46F (7.7C) MDSS GmbH...
• The therapy unit is not intended to be used in a wet environment. • The NICE1 has an IPx1 rating and can tolerate light rain during movement or storage. If the unit gets 4. CONTRADICA TIONS, CAUTIONS, wet, unplug the unit from the wall and allow the unit to dry before use.
The following instructions apply to all users and settings as described in section 2 NICE1 is intended for indoor use only. Do not operate NICE1 in or near a wet Indications for Use: healthcare professional in hospitals, outpatient clinics, athletic environment.
The patient MUST be familiar with all warnings and cautions listed in Section 4 before attempting to operate the unit. NICE1 can perform therapies for the following: • Cold Therapy • Cold Therapy + Compression 8.1 TURNING THE UNIT ON FOR THE FIRST TIME...
2. Disconnect the therapy wrap from the hose. 3. Connect the Drain Fitting to the end of the hose. Note: Drain completely before traveling on an airplane or shipping. NICE RECOVERY SYSTEMS PN 6-1000-01-AU REV A NICE RECOVERY SYSTEMS PN 6-1000-01-AU REV A...
50hPa. 12. TROUBLESHOOTING GUIDE NICE1 has many internal so ware safeguards to help protect the users and the unit from unsafe operation. In this section you will find a list of system warnings and errors that may occur if a potentially unsafe situation arises while using NICE1. Neither the unit nor the wraps are intended for field repair.
Restart unit. If error persist contact service provider. Nice Recovery Systems, LLC is committed to servicing our NICE1 both during and Error 112: High Temperature Error Also ensure that the front and back of the unit a er sale to the customer.
The NICE1 is intended for use in the electromagnetic environment specified below. The customer or the user of the NICE1 should assure that it is used in such an environment. Limited Warranty Terms: Nice Recovery Systems LLC (“Nice Recovery”) warrants to...
Page 12
The NICE1 is intended for use in an electromagnetic environment in which radiated RF disturbances customer or the user of the NICE1 should assure that it is used in such an environment. are controlled. The customer or the user of the NICE1 can help prevent electromagnetic interference...
Need help?
Do you have a question about the NICE1 and is the answer not in the manual?
Questions and answers