Gigabyte GA-P35-S3G User Manual page 46

Standard Timing Control
********
CAS Latency Time
Options are: Auto (default), 3~6.
DRAM RAS# to CAS# Delay
Options are: Auto (default), 1~15.
DRAM RAS# Precharge
Options are: Auto (default), 1~15.
Precharge delay (tRAS)
Options are: Auto (default), 1~63.
Advanced Timing Control
********
ACT to ACT Delay (tRRD)
Options are: Auto (default), 1~15.
Rank Write to READ Delay
Options are: Auto (default), 1~31.
Write To Precharge Delay
Options are: Auto (default), 1~31.
Refresh to ACT Delay
Options are: 0~255 (Default: 0)
Read to Precharge Delay
Options are: Auto (default), 1~15.
Static tRead Value
Options are: Auto (default), 1~31.
Static tRead Phase Adjust
Options are: Auto (default), 1~31.
******** System Voltage Optimized
System Voltage Control
Determines whether to manually set the system voltages. Auto lets BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable.
(Default: Manual)
DDR2 OverVoltage Control
Allows you to to set memory voltage.
Normal
+0.1V ~ +0.4V
Note: Increasing memory voltage may result in damage to the memory.
FSB OverVoltage Control
Allows you to set the Front Side Bus voltage.
Normal
+0.1V ~ +0.3V
GA-P35-S3G Motherboard
********
********
********
Supplies the memory voltage as required. (Default)
Increases memory voltage by 0.1V to 0.4V at 0.1V increment.
Supplies the FSB voltage as required. (Default)
Increases FSB voltage by 0.1V to 0.3V at 0.1V increment.
- 46 -