Integrated Peripherals - Gigabyte GA-P35-S3G User Manual

Lga775 socket motherboard for intel core processor family/intel pentium processor family/intel celeron processor family
Table of Contents

Advertisement

2-5

Integrated Peripherals

SATA AHCI Mode
SATA Port0-3 Native Mode
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Azalia Codec
Onboard H/W LAN
SMART LAN
Onboard LAN Boot ROM
Onboard IDE Controller
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
: Move
Enter: Select
F5: Previous Values
SATA AHCI Mode (Intel ICH9 Southbridge)
Enables or disables AHCI for the SATA controllers integrated in the Intel ICH9 Southbridge.
Disabled
AHCI
(Note)
SATA Port0-3 Native Mode (Intel ICH9 Southbridge)
Specifies the operating mode of the integrated SATA controllers.
Disabled
Enabled
USB Controller
Enables or disables the integrated USB controller. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
USB 2.0 Controller
Enables or disables the integrated USB 2.0 controller. (Default: Enabled)
USB Keyboard Support
Allows USB keyboard to be used in MS-DOS. (Default: Disabled)
USB Mouse Support
Allows USB mouse to be used in MS-DOS. (Default: Disabled)
(Note)
Supported on Windows
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Configures the SATA controllers to PATA mode. (Default)
Configures the SATA controllers to AHCI mode. Advanced Host Controller Inter-
face (AHCI) is an interface specification that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
For more information about AHCI, please visit Intel's website.
Allows the SATA controllers to operate in Legacy IDE mode.
In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared
with other device. Set this option to Disabled if you wish to install operating
systems that do not support Native mode, e.g. Windows 9X/ME. (Default)
Allows the SATA controllers to operate in Native IDE mode.
Enable Native IDE mode if you wish to install operating systems that support
Native mode, e.g. Windows XP/2000.
Vista
operating system only.
®
®
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Enabled]
[Press Enter]
[Disabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
F10: Save
- 37 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents