Gigabyte GA-MA69VM-S2 User Manual page 68

Step 4:
After the SATA controller driver installation is completed, you can proceed with the Windows 2000/XP
installation.
WindowsXP Professional Setup
Welcome to Setup.
This port of the Setup program prepares Microsoft(R)
Windows (R) XP to run on your computer.
To set up Windows XP now, press ENTER.
To repair a Windows XP installation using
Recovery Console, press R.
To quit Setup without installing Windows XP, press F3.
Enter= Continue
(Note: Each time you add a new hard drive to a RAID array, the RAID driver will have to be installed
under Windows once for that hard drive. After that, the driver will not have to be installed.)
GA-M69VM-S2 Motherboard
R=Repair F3=Exit
Figure 17
- 68 -