• (1) SDXC (up to 4.0 UHS-II) cards (not included) • (1) CFexpress (Type B) cards (not included) Backside Atlas Dual CFexpress and SD card reader Setup This section describes the process of setting up the Atlas Dual CFexpress and SD card reader Overview...
Page 3
A. Atlas Dual CFexpress and SD Reader – (1) CFexpress Type-B Slot supports Cfexpress cards /& (1) SD 4.0 Slot supports UHS-II cards B. LED Indicator: Operation LED Function Connected card reader without memory cards. Connected card reader while the host is sleeping.
Device Setup • Connect the Atlas Dual SD card reader to your compatible host via the tethered USB-C cable or USB-C cable connected to the USB-C 10Gb/s port. • Insert an SDXC card into either card slot by aligning the memory card notches with the internal card reader connections.
• To store the tethered USB-C cable, place the USB-C connector into the cavity on the underside of the Atlas Dual CFexpress and SD card reader, press down on the black connector, and wrap the cable by pressing down into the notch.
Page 7
• If you can’t write to the memory card, check to see if the Write protection switch is enabled. • OWC support is here to help. Please have your serial number ready which can be located on the bottom of your Atlas Dual CFexpress and SD card reader and printed...
Need help?
Do you have a question about the Atlas and is the answer not in the manual?
Questions and answers