Table of Contents
Advertisement
Flash BIOS Method Introduction
Method 1 : Dual BIOS / Q-Flash
A. What is Dual BIOS Technology?
Dual BIOS means that there are two system BIOS (ROM) on the motherboard, one is the Main BIOS and the
other is Backup BIOS. Under the normal circumstances, the system works on the Main BIOS. If the Main
BIOS is corrupted or damaged, the Backup BIOS can take over while the system is powered on. This means
that your PC will still be able to run stably as if nothing has happened in your BIOS.
B. How to use Dual BIOS and Q-Flash Utility?
1.) After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it will allow
you to enter Award BIOS CMOS SETUP, then press <F8> to enter Flash utility.
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F8: Dual BIOS/Q-Flash
2.) Award Dual BIOS Flash ROM Programming Utility
Boot From..........................................................................
Main ROM Type/Size.........................................................
Backup ROM Type/Size.....................................................
PgDn/PgUp: Modify
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Enter Dual BIOS/Q-Flash Utility (Y/N)? Y
Dual BIOS Utility V1.33
Wide Range Protection
Boot From
Auto Recovery
Halt On Error
Keep DMI Data
Copy Main ROM Data to Backup
Load Default Settings
Save Settings to CMOS
Q-Flash Utility
Update Main BIOS from Floppy
Update Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
: Move
- 59 -
Select Language
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
F3: Change Language
F10: Save & Exit Setup
Main Bios
SST 39SF040
512K
SST 39SF040
512K
Disable
Main Bios
Enable
Disable
Enable
ESC: Reset
F10: Power Off
Technical Reference
Advertisement
Table of Contents
