Step 2: Installing Memory Modules
Before installing the memory modules, adhere to the following warning:
1. When DIMM LED is ON, do not install / remove DIMM from socket.
2. Please note that the DIMM module can only fit in one direction due to
the one notch. Wrong orientation will cause improper installation.
Please change the insert orientation.
The motherboard has 4 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket. The DIMM module can only fit in one direction due to the notch. Memory size can vary
between sockets.(*The GA-K8NNXP-940 only support registered DIMM!)
Total Memory Size Per Chip Select
Device Used on DIMMs
64 Mbit (4Mx4-bitsx4 banks)
64 Mbit (2Mx8-bitsx4 banks)
64 Mbit (1Mx16-bitsx4 banks)
128 Mbit(8Mx4-bitsx4 banks)
128 Mbit(4Mx8-bitsx4 banks)
128 Mbit(2Mx16-bitsx4 banks)
256 Mbit(16Mx4-bitsx4 banks)
256 Mbit(8Mx8-bitsx4 banks)
256 Mbit(4Mx16x4 banks)
512 Mbit(32Mx4-bitsx4 banks)
512 Mbit(16Mx8-bitsx4 banks)
512 Mbit(8Mx16-bitsx4 banks)
1 Gbit(64Mx4-bitsx4 banks)
1 Gbit(32Mx8-bitsx4 banks)
1 Gbit(16Mx16-bitsx4 banks)
GA-K8NNXP-940 Motherboard
k8nnxp-940_1001_q.p65
Size Per CS
128 Mbyte
64 Mbyte
32 Mbyte
256 Mbyte
128 Mbyte
64 Mbyte
512 Mbyte
256 Mbyte
128 Mbyte
1 Gbyte
512 Mbyte
256 Mbyte
2 Gbyte
1 Gbyte
512 Mbyte
- 18 -
18
Notch
DDR
2003/10/2, ¤U¤È 05:19