System Voltage Optimized
********
System Voltage Control
Determines whether to manually set the system voltages. Auto lets BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable.
(Default: Manual)
DDR2 OverVoltage Control
Allows you to set memory voltage.
Normal
+0.05V ~ +1.55V
Note: Increasing memory voltage may result in damage to the memory.
PCI-E OverVoltage Control
Allows you to set PCIe voltage.
Normal
+0.05V ~ +0.35V
FSB OverVoltage Control
Allows you to set the Front Side Bus voltage.
Normal
+0.05V ~ +0.35V
(G)MCH OverVoltage Control
Allows you to set the North Bridge voltage.
Normal
+0.025V ~ +0.375V Increases North Bridge voltage by 0.025V to 0.375V at 0.025V increment.
Loadline Calibration
Enabled
Disabled
CPU Voltage Control
Allows you to set the CPU voltage. Normal sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the
CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
GA-EP35-DS4 Motherboard
********
Supplies the memory voltage as required. (Default)
Increases memory voltage by 0.05V to 1.55V at 0.05V increment.
Supplies the PCIe bus voltage as required. (Default)
Increases PCIe bus voltage by 0.05V to 0.35V at 0.05V increment.
Supplies the FSB voltage as required. (Default)
Increases FSB voltage by 0.05V to 0.35V at 0.05V increment.
Supplies the North Bridge voltage as required. (Default)
Lets the BIOS fine-tune the CPU Vcore voltage. (Default)
Disables this function.
- 54 -