Advertisement
Quick Links
Advertisement
Related Manuals for Schiit Saga 2
Summary of Contents for Schiit Saga 2
- Page 1 P R E A M P L I F I E R...
- Page 2 6. Refer all servicing to qualified service personnel. Service is required when the device has been damaged, including cord or to some great tunes on Saga 2 instead! plug damage, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Page 3 1 RCA inputs. Connect up to 4 inputs to 4 Power switch. Up is on, down is off. Saga using RCA cables. The inputs are Simple as that. But it won’t work at all conveniently numbered “1” to “4” to match unless you proceed to (5) below.
- Page 4 You can also mute at any time using the out of your speakers. remote control. Note: Saga 2 uses a relay ladder volume control, so you will hear clicks from the chassis when changing volume. You also may get transient drop-outs while...
- Page 5 Saga/Freya Yes, Saga 2 comes with a remote control. It’s the same one we use for all Sagas, Freyas, and Kara. INPUT 1 Input. Press this button to select the input you want to listen to. If you skip the input, keep pressing—it cycles back around.
- Page 6 Once you stop system. adjusting, it will be fine. There’s no sound after I turn Saga 2 on. Does Saga 2 convert from SE to balanced? Saga 2 delays the output for 40 seconds If you are using the Low or High gain after you first turn the preamp on for self- settings, yes.
- Page 8 (1) Remote Control If a defect covered by this warranty occurs during this (1) 24VAC/6VAC wall wart period, Schiit Audio will repair the defective product, free of charge. Date of purchase will be based on customer receipts, (0) Tubes, feedback, otherwise date of manufacturing will be used.
Need help?
Do you have a question about the Saga 2 and is the answer not in the manual?
Questions and answers