Gigabyte GA-8VT880P Combo User Manual page 43

C.I.A. Frequency (Mhz)
Cruise Set C.I.A. to Cruise. (Automatically increase CPU frequency(3%) by CPU loading.
Sports Set C.I.A. to Sports. (Automatically increase CPU frequency(5%) by CPU loading.
Racing Set C.I.A. to Racing. (Automatically increase CPU frequency(7%) by CPU loading.
Turbo Set C.I.A. to Turbo. (Automatically increase CPU frequency(10%) by CPU loading.
Warning: Stability is highly dependent on system components.
Fixed AGP/PCI Frequency
This item will be available when "CPU Host Clock Control" is set to Enabled.
Adjust AGP/PCI clock asychrohous with CPU.
AGP/PCI Frequency (Mhz)
The values depend on Fixed AGP/PCI Frequency.
DRAM Clock (MHz)
Please set DRAM Clock according to your requirement.
If you use DDR333 DRAM module, please set "DRAM Clock(MHz)" to "166-DDR333". If you use DDR400/
DDRII400 DRAM module, please set "DRAM Clock(MHz)" to "200-DDR400".
Incorrect using it may cause your system broken. For power End-User use only!
CPU Voltage Control
Supports adjustable CPU Vcore from 0.8375V to 1.6000V. (Default value: Normal)
Warning: CPU may be damaged or reduce CPU life-cycle when CPU is over-voltage.
Normal CPU Vcore
Display your CPU Vcore Voltage.
AGP Voltage Control
Normal Set AGP Voltage Control to Normal. (Default value)
+0.1V Set AGP Voltage Control to +0.1V.
+0.2V Set AGP Voltage Control to +0.2V.
+0.3V Set AGP Voltage Control to +0.3V.
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when
enable this feature.
DDR Voltage Control
Please note that by overclocking your system through the increase of the DDR voltage, damage to the
memory may occur.
Normal Set DDR Voltage Control to Normal. (Default value)
+0.1V Set DDR Voltage Control to +0.1V.
+0.2V Set DDR Voltage Control to +0.2V.
+0.3V Set DDR Voltage Control to +0.3V.
+0.4V Set DDR Voltage Control to +0.4V.
+0.5V Set DDR Voltage Control to +0.5V.
+0.6V Set DDR Voltage Control to +0.6V.
+0.7V Set DDR Voltage Control to +0.7V.
Incorrect using it may cause your system broken. For power End-User use only!
- 43 - BIOS Setup