CPU Hyper-Threading
Enabled
Enables CPU Hyper Threading Feature. Please note that this feature is only working
for operating system with multi processors mode supported. (Default value)
Disabled
Disables CPU Hyper Threading.
Limit CPUID Max. to 3
Enabled
Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled
Disables CPUID Limit for windows XP. (Default value)
2-3
Integrated Peripherals
OnChip IDE Channel 0
OnChip IDE Channel 1
OnChip Serial ATA
SATA Mode
AC97 Audio
USB 1.1 Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Onboard H/W LAN
OnBoard LAN Boot ROM
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
x UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
: Move
Enter: Select
F5: Previous Values
OnChip IDE Channel0
Enabled
Enable onboard 1st channel IDE port.(Default value)
Disabled
Disable onboard 1st channel IDE port.
OnChip IDE Channel1
Enabled
Enable onboard 2nd channel IDE port.(Default value)
Disabled
Disable onboard 2nd channel IDE port.
OnChip Serial ATA
Enabled
Enable VT8237R Serial ATA support. (Default value)
Disabled
Disable this function.
SATA Mode
RAID
Set onboard SATA mode to RAID. (Default value)
IDE
Set onboard SATA mode to IDE.
AC97 Audio
Auto
Enable onboard AC'97 audio function. (Default value)
Disabled
Disable this function.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Integrated Peripherals
[Enabled]
[Enabled]
[Enabled]
[RAID]
[Auto]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Normal]
Half
[378/IRQ7]
[SPP]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
- 35 -
Menu Level
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup