Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled
Disable this function. (Default Value)
Enabled
Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Month Alarm :
Day (of Month) :
Time (hh : mm : ss) :
Power LED in S1 state
Blinking
In standby mode(S1), power LED will blink. (Default Value)
Dual/OFF
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
NA, 1~12
1~31
(0~23) : (0~59) : (0~59)
- 39 -
BIOS Setup