Table of Contents
Advertisement
FOnBoard Parallel port
MThis feature allows you to select from a given set of parameters if the parallel port uses the
onboard I/O controller.
8378/IRQ7
8278/IRQ5
83BC/IRQ7
FParall el Port Mode
MThis feature allows you to connect with an advanced print via the port mode it supports.
8SPP
8EPP
8ECP
8ECP+EPP
FECP Mode Use DMA
(Whe n Paralle l Port Mode is se t [ECP or ECP+EPP])
83
81
FGame Port Address
8Disabled
8201
8209
FMidi Port Address
8Disabled
8300
8330
F Midi Port IRQ
85
810
Enabl e On Board LPT port and address is 378.(Default Value)
Enable On Board LPT port and address is 278.
Enable On Board LPT port and address is 3BC.
Using Parallel port as Standard Parallel Port . (Default Value)
Using Parall e l port as Enhanced Parallel Port .
Using Paral l el port as Extended Capabili t ies Port .
Using Parallel port as ECP & EPP mode.
Use DMA 3 for ECP mode. (Default v alue)
Use DMA 1 for ECP mode.
Disabled this function.
Enabl e d Game Port and Address i s 201. (Default Value)
Enabled Game Port and Address is 209.
Disabled t h is function. (Default Value)
Enabled Midi Port and Address is 300.
Enabled Midi Port and Address is 330.
Midi Port use I R Q 5.
Midi Port use IRQ 10. (Default Value)
- 47 -
BIOS Setup
Advertisement
Table of Contents
