Table of Contents
Advertisement
Is memory LED on and CPU fan running?
Check if there is display.
Turn off the system. Reboot after keyboard and mouse
have been plugged in.
Check if keyboard is working properly.
Press <Del> to enter BIOS setup. Choose "Load
Optimized Defaults" and save then exit setup.
Turn off the system and re-connect the IDE cable. Check
if the system can reboot successfully.
Reinstall Windows OS, and reinstall add-on cards and cables.
Then try to reboot the system.
If the above procedure unable to solve your problem, please contact with your local retailer or
national distributor for help. Or, you could submit your question to the service mail via Gigabyte
website technical support zone
(http://www.gigabyte.com.tw). The appropriate response will be provided ASAP.
A
Yes
Yes
Yes
Yes
END
- 103 -
The problem could
be caused by
power supply, CPU,
memory or CPU/
No
memory socket
itself.
Failure has been excluded.
Perhaps your VGA
No
card / VG A slot or
monitor is defectiv e.
Failure has been excluded.
It is possible that
No
your keyboard or
keyboard connector
is defectiv e.
Failure has been excluded.
No
The problem w as
probably caused by
the IDE device /
connector or cable.
Failure has been excluded.
Appendix
Advertisement
Table of Contents
