Power Management Setup - Gigabyte GA-8I865PE-TW User Manual

Power Management Setup

ACPI Suspend Type
Power LED in S1 state
Off by Power button
PME Event Wake Up
ModemRingOn/WakeOnLan
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On by Mouse
Power On by Keyboard
x KB Power ON Password
AC BACK Function
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
S3(STR)
Power LED in S1 state
Blinking
Dual/OFF
Off by Power button
Instant-Off
Delay 4 Sec.
PME Event Wake Up
Disabled
Enabled
ModemRingOn/WakeOnLan
Disabled
Enabled
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled
Enabled
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
Time (hh: mm: ss) Alarm :
GA-8I865PE-TW Motherboard
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
[S1(POS)]
[Blinking]
[Instant-Off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value
F6: Fail-Save Default
Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
Set ACPI suspend type to S3/STR(Suspend To RAM).
In standby mode(S1), power LED will blink. (Default value)
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Press power button then Power off instantly. (Default value)
Press power button 4 seconds to power off. Enter suspend if button is pressed
less than 4 seconds.
Disable this function.
Enable PME Event Wake up. (Default value)
Disable Modem Ring on/wake on Lan function.
Enable Modem Ring on/wake on Lan. (Default value)
Disable this function. (Default value)
Enable alarm function to POWER ON system.
Everyday, 1~31
(0~23) : (0~59) : (0~59)
- 40 -
Item Help
Menu Level
[S1(POS)]
Set suspend type to
Power On Suspend under
ACPI OS
[S3(STR)]
Set suspend type to
Suspend to RAM under
ACPI OS
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help