Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
BRUSHLESS
9" CORDLESS CUT OFF SAW
80V
LITHIUM
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
®
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
24f
59660
Advertisement
Table of Contents
Related Manuals for Atlas 59660
Summary of Contents for Atlas 59660
- Page 1 ® 9" CORDLESS CUT OFF SAW LITHIUM Visit our website at: http://www.harborfreight.com 59660 email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1‑888‑866‑5797 as soon as possible.
-
Page 2: Important Safety Information
Safety Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Page 2 For technical questions, please call 1-888-866-5797. Item 59660... -
Page 3: Personal Safety
6. Keep cutting tools sharp and clean. Properly risk of starting the power tool accidentally. maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Item 59660 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Cut-Off Machine Safety Warnings
Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. Page 4 For technical questions, please call 1-888-866-5797. Item 59660... - Page 5 7. Do not use a battery pack or power tool that Battery Pack while charging. is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. Item 59660 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Kickback And Related Warnings
Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel. Page 6 For technical questions, please call 1-888-866-5797. Item 59660... -
Page 7: Vibration Safety
If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SaVe tHeSe inStructiOnS. Item 59660 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Extension Cords
WARNING marking concerning Risk of Respiratory Injury. Wear NIOSH‑approved dust mask/respirator. Specifications Battery Type Atlas 40V / 8 0V Li‑Ion Charger Type Atlas 40V / 8 0V Li‑Ion Rated No Load Speed : 6500/min Maximum Wheel Diameter 9" (Ø230mm) Arbor 7/8"... - Page 9 Handle Latch trigger Safety trigger Wheel Magnetic Filter Wrench Storage cover (in handle) auxiliary Handle Battery compartment Overload indicator Main Handle Spindle Lock Wheel Guard Water Hose Lever Valve coupler Item 59660 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Tool Set Up
3. Release the Wheel Guard Lever, confirming it engaged the Wheel Guard and locked it in place. Rotate Wheel Guard slightly to allow Lever to lock into place if necessary. Wheel Guard Lever Page 10 For technical questions, please call 1-888-866-5797. Item 59660... -
Page 11: Work Piece And Work Area Set Up
2. Secure loose workpieces using a vise or clamps hardware in or near the workpiece. This (not included) to prevent movement while working. is especially critical for plunge cuts. ® Item 59660 For technical questions, please call 1-888-866-5797. Page 11... - Page 12 To stop the Saw, release the Trigger. 7. Allow the Wheel to reach full speed before feeding Wheel into the workpiece. WarninG! tO preVent SeriOuS inJury: The tool will restart automatically if stalled. Page 12 For technical questions, please call 1-888-866-5797. Item 59660...
- Page 13 13. To prevent accidents, turn off the tool and remove its Battery Pack after use. Open Water Valve, tip tool back to allow water to drain out. Clean, then store the tool indoors out of children’s reach. Item 59660 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Cleaning, Maintenance, And Lubrication
Replacement parts may be available for this item. Visit harborfreight.com/parts for a list of in stock parts. Reference UPC 1 93175478016. Page 14 For technical questions, please call 1-888-866-5797. Item 59660... -
Page 15: Troubleshooting
Saw. Open water valve. 2. Blocked water tube 2. Flush water tube. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect Battery pack and charger power supply before service. Item 59660 For technical questions, please call 1-888-866-5797. Page 15... - Page 16 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 59660 and is the answer not in the manual?
Questions and answers