Page 2
This manual must be carefully read by all persons who have or will have the responsibility for using or maintaining this product. Any warranties made by Crye Precision LLC with respect to this product are voided if the product is not used and maintained in accordance with the instructions in this manual.
Page 3
WARNING The ASR™ LANYARD IS FOR HORIZONTAL POSITIONING RESTRAINT, NOT FOR RAPPELLING. THE FRONT ANCHOR LOOP IS THE ONLY SAFE POINT TO ATTACH A LANYARD, ROPE OR CARABINER. DO NOT expose your lanyard to open flame or excessive heat DO NOT attempt to modify or repair the lanyard in any way ...
CONTENTS EQUIPMENT INFORMATION Introduction................. Features................Included Components............CONFIGURING THE ASR™ LANYARD Attaching to LOAD RATED BELTS.......... ASR™ LANYARD Adjustment..........Releasing from LOAD RATED BELTS........Stowing Safety Release Pull Tab..........NOTES FOR PROPER USE Inspection................Care Instructions..............
18” to 30”. Made in the US from US and non-US materials. FEATURES There are numerous features incorporated into both the Crye Precision LOAD RATED BELTS and ASR™ LANYARD that are based on user needs and feedback from various SOF groups. The main features are: Officially approved for use by USSOCOM ...
ASR™ LANYARD OPERATOR’S MANUAL CONFIGURING THE ASR™ LANYARD ATTACHING TO LOAD RATED BELTS To attach the ASR™ LANYARD, perform the following: Loop finger or thumb under the safety release pull tab. Grasp the safety release pull tab and pull it out from the stowage retainer.
ASR™ LANYARD OPERATOR’S MANUAL CONFIGURING THE ASR™ LANYARD ASR™ LANYARD ADJUSTMENT To shorten the ASR™ LANYARD, pull the free To elongate the ASR™ LANYARD, use thumb to pull back on running end away from the body—excess webbing the adjustment buckle and pull carabiner away from the body. can be stowed under the elastic retainers.
ASR™ LANYARD OPERATOR’S MANUAL CONFIGURING THE ASR™ LANYARD RELEASING FROM LOAD RATED BELTS Loop finger or thumb under the safety release pull tab. Grasp the safety release pull tab and pull it out from the stowage retainer. Pull safety release pull tab away from the hardware attachment point to release the snap shackle from the LOAD RATED BELTS.
ASR™ LANYARD OPERATOR’S MANUAL CONFIGURING THE ASR™ LANYARD STOWING SAFETY RELEASE PULL TAB Fold the safety release tab so that the VELCRO holds Stow the safety release pull tab into the retainer. ® the fold secure, then insert back into the retainer.
ASR™ LANYARD OPERATOR’S MANUAL NOTES FOR PROPER USE Notes for Proper Use must be read prior to each use. INSPECTION Inspect the entire ASR™ LANYARD before each use. Inspect all stitching and webbing to ensure they are intact, and that they are not distorted, burned or abraded. ...
Need help?
Do you have a question about the ASR LANYARD and is the answer not in the manual?
Questions and answers