Gateway 205 User Manual page 38

Using the Gateway 205 Projector
Display image is wider on the top or bottom
■
Press the
image. For more information, see "Remote back" on page 14.
■
Reposition the projector to get a better angle on the projection screen.
Display image is poor or blurred
■
If the projector is connected to your computer, press the
the remote control to automatically adjust the display image to the ideal
settings.
■ Use the lens adjustment wheel to manually focus the display image.
■ Use the OSD menus to adjust the brightness and contrast. For more
information, see "OSD options" on page 23.
■
Reposition the projector to get a better angle on the projection screen.
Remote control does not work
■
Make sure that you are less than 29.5 feet (9 meters) from the infrared
remote sensors on the front and back of the projector.
■ Make sure that nothing is blocking the infrared remote sensors on the front
and back of the projector.
■ Replace the batteries in the remote control. For information on replacing
the batteries, see "Remote control" on page 11.
34
buttons on the remote control to adjust the display
KEYSTONE
www.gateway.com
button on
AUTO